Technical article 105780

The no-rewind device isn't functioning properly on the Seagate CTT8000 Atapi tape drive.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

The data between tape file marks is being overwritten. To reproduce:

Note: You must do this on a machine with a Seagate CTT8000
EIDE/ATAPI tape drive installed.  This device configures as
a pseudo SCSI device, so it uses /dev/*Stp0.
$ tape rewind
$ touch one two three
$ echo one | cpio -ocv > /dev/nrStp0
$ echo two | cpio -ocv > /dev/nrStp0
$ echo three | cpio -ocv > /dev/nrStp0
$ tape rewind
$ cpio -ictv < /dev/nrStp0   (file 'one' should be displayed)
$ cpio -ictv < /dev/nrStp0   (you should see 'two', but actually
                             'three' is displayed)

Solution

This problem has been fixed in SCO OpenServer 5.0.5.

From the Xinuos technical article database, record 105780. Reproduced with permission. The original is at www.sco.com/ta/105780, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.