Technical article 105952

The RAID adapter in my HP NetServer LX Pro or LH isn't recognized when OpenServer 5.0.x is installed.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

I am unable to install SCO OpenServer Enterprise on an HP
NetServer with NetRaid controller for a hard drive array
and Adaptec controller for a SCSI CD-ROM drive. If I use no
bootstring, then I get an error "Unable to locate boot disk
controller".  If I use a bootstring supplied by HP, for example:
link="amird" Sdsk=amird(0,0,0,0) Srom=alad(0,5,0)

then I get back the error Restart Not Found, and the installation aborts.

Cause

The hard drive and/or CD-ROM drive are not being located for the installation.

Solution

The following bootstring has been known to work in this configuration:

restart link=amird Sdsk=amird(0,0,0,0) Srom=alad(0,0,5,0)
NOTE:     The floppy disk of drivers provided by Hewlett Packard will
          have to be available to complete this installation.

See also

HP NetServer SCO UNIX Installation Guide.

From the Xinuos technical article database, record 105952. Reproduced with permission. The original is at www.sco.com/ta/105952, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.