Technical article 110912

The xntpd(ADMN) command receives the wrong process priority.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

When running xntpd, any additional process that is 100% CPU-intensive causes xntpd to stall.

Cause

xntpd, the Network Time Protocol daemon, was designed to do a system call to give its process the highest possible priority in order to minimize time jitter in its calculations. Unfortunately, it was programmed to request the lowest possible priority. This is normally only a minor problem, as time will jitter slightly more than it should.

However, when you run a program that causes the CPU to be 100% busy, like SETI@Home or a distributed encryption cracking program such as RC5DES, xntpd has actually requested such a low priority that it will never get to run on such a system.

Solution

Currently, there are no workarounds available from SCO.  The fix
for this problem has been incorporated into the newest public
domain source for the NTP protocol suite.  SCO does not yet
provide a binary distribution containing the fix, but you can
download the source and build your own version.

This is scheduled to be addressed in a future release of SCO OpenServer 5.

See also

Manual page: xntpd(ADMN)

ta107619, "How do I configure xntpd(ADMN) to alter timekeeping limitations?"

From the Xinuos technical article database, record 110912. Reproduced with permission. The original is at www.sco.com/ta/110912, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.