Technical article 105274

timed(ADMN) reports "no network usable" error on SCO OpenServer 5.0.

OpenServer 5.0.0

Written · Last revised

Problem

If I run this timed(ADMN) command on SCO OpenServer 5.0:

#timed -n scotest

where "scotest" has been defined in the file "/etc/networks" as the network name corresponding to a specific local IP network address, for example, of the form "193.126.22", this error occurs:

no network usable

If the same command is run on SCO UNIX System V/386 Release 3.2 Operating System Version 4.2, no error occurs.

Cause

The SCO OpenServer 5.0 timed utility incorrectly compares the network address entry, as listed in the /etc/networks file, to those available networks on the system. It finds no corresponding match for the TCP/IP network address (that is, the number, not the name) and reports a "no network usable" error.

NOTE:     The available networks can be listed from the command line using
          the "ifconfig -a" command.

Solution

Install SLS OSS449E. The /etc/timed has been modified to correct this problem.

See also

networks(SFF), timed(ADMN), ifconfig(ADMN).

From the Xinuos technical article database, record 105274. Reproduced with permission. The original is at www.sco.com/ta/105274, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.