Problem
POP mail is not working in some manner.
Solution
There are a number of reasons why POP mail may not work. Following are some places to start looking for the problem.
1. Are you able to retrieve incoming mail? Does outgoing mail
leave the system? Are both incoming and outgoing failing?2. Are there any errors in /usr/adm/syslog that point to problems with named(ADMN), sendmail(ADMN), and/or popper?
3. Can you telnet directly to the POP server's port? That is,
you should be able to do a "telnet x.x.x.x pop3" directly from
the command line, where x.x.x.x is the IP of the mail server.
Enter "user username" and "pass password" when you get the POP
prompt. Here is an example from the root prompt "#":# telnet sulawesi pop3 Trying 132.147.144.216... Connected to sulawesi. Escape character is '^]'. +OK SCO POP3 server (version 2.1.4-R3) at sulawesi.uss.sco.com starting. user david +OK Password required for david. pass password +OK david has 0 message(s) (0 octets). quit #
If you get a message like "pop3: bad port number", check the /etc/services file on the mail server to make sure there is a pop3 entry as follows:
pop3 110/tcp pop3 postoffice3Comment out any other pop references for port 109 or 110.
If you get a response from the server and it just hangs there or times out, check the file /etc/inetd.conf for an entry such as:
pop3 stream tcp nowait root /etc/popper popperIt may also be the case that the /etc/popper binary is missing or
corrupted. Do a Software-->System Verify-->Thorough to scan the
system for missing or corrupted files.4. What client are you using to retrieve pop mail? Does the
POP behavior change depending upon the client?5. If you are using virtual domains, does POP mail for all the virtual domains fail in the same manner, or is only one virtual domain having problems?
Have you verified that the file:/usr/internet/ip/x.x.x.x/sco_mail/passwddoes exist and contains POP user account data? (If not, create
and populate the file with the pwfile utility, and see if it
works. Enter "pwfile" at the root prompt by itself to see all
the options.)Check the file /usr/internet/ip/x.x.x.x/sco_mail/config for the
following options:DISABLED=0
SYSTEM_USERS=0The DISABLED value is a toggle that enables or disables POP
services for a virtual domain. DISABLED=0 means POP is not
disabled. SYSTEM_USERS=0 means there is a private passwd file
for this virtual domain.6. You can also put popper in debug mode in /etc/inetd.conf:
pop3 stream tcp nowait root /etc/popper -d -t /tmp/debug popper
^^^^^^^^^^^^^^^^
The "-d" flag turns on debugging and the "-t /tmp/debug"
signifies the debug file to log to. Then try the telnet from
above and see what you can correlate between the /tmp/debug
output and the responses you get from popper.7. There may also be problems with sendmail, DNS, or general
networking issues. See other articles in this database on
troubleshooting those.