Technical article 110353

TLS704 - Statically linked utilities and versions of libc.so.1 for OpenServer 5.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

Where can I obtain a set of statically linked utilities that will run when my libc.so.1 file is missing or becomes corrupted? Also, where can I obtain a replacement copy of libc.so.1 for my system release?

Solution

Obtain Technical Library Supplement (TLS) TLS704, Statically
linked utilities and versions of libc.so.1 for OpenServer 5.
You can download this TLS from the TLS directory on SCO Support's
ftp site at:
https://ftp.scoexpert.com/TLS

TLS704 - Statically linked utilities and versions of libc.so.1 for OpenServer 5

Contents:

TLS704 contains a small set of crucial shell utilities that are statically linked and function independently of /usr/lib/libc.so.1. In the event that the libc.so.1 becomes corrupted or lost, these utilities can aid in the restoration of the file, provided that a copy of libc.so.1 exists on the system. Note that OpenServer 5.0.5 already has these utilities installed in /sbin and are identical to those supplied by this TLS.

This TLS also includes the versions of the libc.so.1 file supplied with each OpenServer 5 release (5.0.0, 5.0.2, 5.0.4, 5.0.5), along with the replaced versions of this file supplied with each of the following SLSs:

RS505A  (on OpenServer 5.0.5)
OSS600A (on OpenServer 5.0.5 + RS505A)
OSS601A (on OpenServer 5.0.2 or 5.0.4)
OSS603A (on OpenServer 5.0.0)
Installation Instructions:

To install TLS704, place the tls704.tar.Z file in the /tmp directory. Log in as root and take these steps:

# cd /tmp
# uncompress tls704.tar.Z
# tar xvf tls704.tar

The statically linked utilities will be located in /tmp/tls704/sbin/ and the various lib.so.1 files will be in /tmp/tls704/libc_backup/, organized by the release version of the operating system or SLS. Move the newly created files from /tmp, to a safe location on your root filesystem for future use. Suggested locations for the libc.so.1 files are /usr/local/libc_backup or /libc_backup, and /sbin for the statically linked utilities.

NOTES:    After moving or copying the files, it is critical that they have
          the correct permissions associated with them or they may not
          function.  Make sure the utilities have these permissions set:
-rwx--x--x   1 bin      bin       cp
-rwx--x--x   1 bin      bin       ln
-rwx--x--x   1 bin      bin       mv
-rwxr-xr-t   1 bin      bin       sh
-rwx--x--x   1 bin      bin       sync
-rwx--x--x   1 bin      bin       uadmin

Also make sure that the libc.so.1 file has these permissions set:

-r-xr-xr-x   1 bin      bin       libc.so.1

See also

ta110334, "How to recover from a lost or corrupted /usr/lib/libc.so.1 on OpenServer 5."

ta110335, "After unloading OSS601A, shell commands fail on my 5.0.2 system with "Killed".

From the Xinuos technical article database, record 110353. Reproduced with permission. The original is at www.sco.com/ta/110353, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.