Problem
I have several SCO OpenServer 5.0.2 systems running TCP/IP over a Token Ring network. The systems run several different manufacturers' Token Ring cards including Madge, IBM, and 3COM. On several occasions, at various times of the day, and seemingly unconnected to network loading, the systems have panicked. Running crash(ADM) on these panic dumps shows the following:
> panic
System Messages:
...
...
...
TDC 3800
Unexpected trap in kernel mode:
cr0 0x8001001B cr2 0x00040150 cr3 0x00002000 tlb
0x00000000
ss 0x00000B9C uesp 0x00000000 efl 0x00010202 ipl
0x00000001
cs 0x00000158 eip 0xF00BB8F1 err 0x00000003 trap
0x0000000E
eax 0xF0264438 ecx 0x0004014C edx 0x3381C6F5 ebx
0xFD2D3F8C
esp 0xE0000B64 ebp 0xE0000B7C esi 0xF0264418 edi
0x00000000
ds 0x00000160 es 0x00000160 fs 0x00000000 gs
0x00000000
cpu 0x00000001PANIC: k_trap - Kernel mode trap type 0x0000000E
Trying to dump 20383 pages to dumpdev hd (1/41), 255 pages
per '.'
..............Panic String: k_trap - Kernel mode trap type 0x%x
Kernel Trap. Kernel Registers saved at 0xe0000b34
ERR=3, TRAPNO=14
cs:eip=0158:f00bb8f1 Flags=10202
ds = 0160 es = 0160 fs = 0000 gs = 0000
esi= f0264418 edi= 00000000 ebp= e0000b7c esp= e0000b64
eax= f0264438 ebx= fd2d3f8c ecx= 0004014c edx= 3381c6f5Kernel Stack before Trap:
STKADDR FRAMEPTR FUNCTION POSSIBLE ARGUMENTS
e0000b64 e0000b7c dlpi_unlin (net1route_table,0,
net1route_table+0x20,net1route_table+0x24)
e0000b84 e0000b9c dlpi_get_n (net1route_table,net1route_
table+0xad8)
e0000ba4 e0000bac dlpi_reloc (net1route_table,net1route_
table+0xad8,0,net1route_table)
e0000bb4 e0000bc4 dlpi_get_n (net1route_table,0x21,
0xfd2d3f30,net1cardinfo)
e0000bcc e0000bec dlpiSR_aut (net1route_table,u+0xc44,0x3,
u+0xc44)
e0000bf4 e0000c08 dlpi_send_ (net1sapinfo+0xd0,u+0xc44,0,
net1sapinfo+0xd0)
e0000c10 e0000c28 dlpi_llc_r (net1sapinfo+0xd0,u+0xc44,
0xfcee4ea0,0xfd2d3f30)
e0000c30 e0000c7c mdi_primit (0xfcee4ea0,0xfd2d3f30,
0xfcee4ea0,0xfd2d3f30)
e0000c84 e0000c94 mdi_messag (0xfcee4ea0,0xfd2d3f30,0x5,0)
e0000c9c e0000cac dlpilrsrv (0xfcee4ea0,0x1,0,0x7)
e0000cb4 e0000cd0 queuerun (curpri,0,0x1)
e0000cd8 e0000ce4 runqueues (0x7,0,proc+0x87b8)
e0000cec e0000cf8 pswtch (sleep+0x20d,0x3e8,0,u+0x1148)
e0000d00 e0000d1c swtch (selwait,0x11a,0,sysent+0x2b8)
e0000d24 e0000e00 poll (0,0x40219c,0,u+0xe28)
e0000e08 e0000e28 systrap (u+0xe34)The systems are running the latest version of the respective network card drivers and Support Level Supplement (SLS) OSS449F, the Network Maintenance Supplement for SCO OpenServer.
Cause
The dlpi_unlink function is part of the SCO DLPI (Data Link Provider Interface). This provides a link between the physical network card and its driver and the OpenServer 5 network protocol stack. For example:
=================
OpenServer 5.0.2+++++++++++++++++
STREAM Head
=================
TCP-----------------
IP
<-----+
----------------- | DLPI and MDI modules
MAC <-----|~~~~~~~~~~~~~~~~~
Network Card~~~~~~|~~~~~~~~~~
|
---> LANIn this case, the DLPI module is unable to handle the amount of incoming route information from the network. Source routing information in a Token Ring environment is provided as a function of the network card driver.
Solution
The problem has been resolved in SCO OpenServer Release 5.0.4.
See also
scohelp(XC) for details on DLPI and Token Ring networking.