Technical article 105902

"Unable to initialize device" when installing a media image on SCO OpenServer.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

I am installing a patch or a driver on my system using custom. When I select "media image" and write the directory where the image(s) are located, I get a window with the following message:

Unable to initialize device

If I click on the "Details" button I get the following:

Scan of archive failed Error opening archive "/tmp/rs504c/VOL.000.000 Test of archive format failed marry: //tmp/rs504c/VOL.000.000: file mode ineligible

Solution

The above error message is specific to the marry(ADM) driver.

The file(s) cannot have the execute bit set. This is usually what causes the marry message.

Make sure that the permissions on the VOL files do not have the execute bit set. Also make sure they are appropriately named VOL.000.000, and that the third digit of the first decimal set increases by one, depending on the number of files.

NOTE:     This problem does not occur on SCO OpenServer Release 5.0.5 systems.

See also

man marry(HW)

ta110658, "Installation of OSS601A from the SCO Year 2000 Resource CD fails with 'Unable to initialize device' error."

From the Xinuos technical article database, record 105902. Reproduced with permission. The original is at www.sco.com/ta/105902, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.