Technical article 105951

Unable to set IPX source routing with token ring on SCO OpenServer Release 5.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

Running netconfig to add a token ring NIC, then configuring IPX/SPX protocol and choosing Advanced Options to select "yes" for source routing with IPX/SPX and "save", results in this error:

ncfgprompter(SetAttr): Illegal response from BE script:

This does not allow a token Ring NIC to set IPX/SPX source routing.

NOTE:     IBM Token-Ring networking should allow a system in a token ring
          network to establish connections to systems in other token
          ring networks using either IPX/SPX, OSI or TCP/IP through a
          gateway if "source routing" is enabled.

Solution

Currently, to resolve this problem, edit the following function in /usr/lib/ipxrt/netconfig/sco_ipxBE:

proc CheckSrcRouting {attr val} {
        global dbgParse dbgfd
        if {$dbgParse} then {
                puts $dbgfd "CheckSrcRouting: '$attr' '$val'"
        }
        SetCurCmdVal $attr $val
}

Do this by adding a new line, "return "OK"" after the "SetCurCmdVal $attr $val" line, before the terminating "}".

After adding "return "OK"" the function should read:

proc CheckSrcRouting {attr val} {
        global dbgParse dbgfd
        if {$dbgParse} then {
                puts $dbgfd "CheckSrcRouting: '$attr' '$val'"
        }
        SetCurCmdVal $attr $val
        return "OK"
}

This problem is scheduled to be addressed in a future release of SCO OpenServer.

See also

man netconfig(ADM)

From the Xinuos technical article database, record 105951. Reproduced with permission. The original is at www.sco.com/ta/105951, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.