Technical article 110321

uname(C) does not report new user count after user license installed.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

After adding a user license with the License Manager, and rebooting
the system, the new user count is not reported when running
uname(C).

Cause

This can be caused by entering a letter "i", or a letter "l", instead of a number "1" in the part of the license data that specifies the user count. For example, consider the following license:

License Number: XXX123456
License Code:   abcdefgh
License Data:   g1;k0;u10;m1y73z9

If the "u10" above is entered as "ui10" or "ul0", the License Manager will accept the license, but the license will not increase the user count on the system.

Solution

Remove the license, and re-add it ensuring that a number "1" is used in the user count.

See also

The manual page for uname(C).

From the Xinuos technical article database, record 110321. Reproduced with permission. The original is at www.sco.com/ta/110321, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.