Technical article 105816

"uname -X" may return "nul000000" as the serial number after RS504C is installed.

OpenServer 5.0.4

Written · Last revised

Problem

After installing Release Supplement RS504C on my SCO OpenServer Release 5.0.4 system, relinking the kernel, and rebooting, I notice that the "Serial =" field of the output from the "uname -X" command displays:

Serial = nul000000
instead of the license number that was used to license the
OpenServer product.  This is known to deactivate some third
party products running on SCO OpenServer Release 5.0.4.

Cause

Release Supplement RS504C may contain a kernel module that needs to be stamped with the license number, using the brand(ADM) command.

Solution

As a simple workaround to this problem, execute this command:

brand -a "<license data>" <license number> <license code> /etc/conf/pack.d/kernel/os.a
where <license data>, <license number>, and <license code> are the
values that appear on the COLA (Certificate of License and
Authenticity) that you used to license your SCO OpenServer system.
Note that the value of the license data is the only argument that
should be placed in double quotes (""), and immediately follows the
"-a" option.  Skip the "-a" option if your COLA contains no
value in the License Data field.
Then relink the kernel.  After you reboot the system, "uname -X"
should return the correct, original license number.

From the Xinuos technical article database, record 105816. Reproduced with permission. The original is at www.sco.com/ta/105816, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.