Problem
When I try to license SCO VisionFS 1.2 on SCO OpenServer 5.0.4 or SCO VisionFS 2.01 on SCO OpenServer 5.0.5, I get the error message "Cannot connect to license server".
Cause
One reason for this error is that the network card installed in the UNIX server is not on the SCO OpenServer Supported Hardware list. A clear indication of this is the output of the netstat command.
On supported hardware, it looks similar to this:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
net0 1500 leeds.sco.C scoleeds 29325838 1574 28068800 2995 2014194
lo0 8232 loopback loopback 808058 0 808058 0 0On the network cards that experience this problem, however, it looks like this:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
ngrpc 1500 192.168.5 unixpro 18818 0 556609 0 14 224.0.0.1
lo0 8232 loopback localhost 11829 0 11829 0 0
224.0.0.1Note the extra line for each network interface containing an IP address only in the "Address" field.
Note: For details on other reasons why this might happen, see the TAs mentioned in the SEE ALSO section.
Solution
Replace the network card(s) with ones from the supported hardware list. You can review this list on the SCO web site:
http://www.sco.com/chwp/owa/hch_search_form See also
ta108342, "How do I add licenses to VisionFS?"ta108271, "I get 'Cannot connect to License Server' when adding a Vision97 license number."