Technical article 109956

Upgrading OpenServer 5.0.4 to 5.0.5, I get an error "Cannot determine root filesystem location".

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

Upgrading SCO OpenServer 5.0.4 to 5.0.5, I get the error:

Cannot determine root filesystem location

The system root disk has been mirrored with SCO's Virtual Disk Manager.

Solution

To work around this problem, unmirror the root disk and then proceed with the upgrade.

To unmirror the disk, bring the system up in graphical mode, and launch the Virtual Disk Manager from its icon. You should see at least three vdisk's listed there.

From the Virtual Disk Manager menu, select Boot, and choose
Unmirror.  When the disk is successfully unmirrored, you should
be able to proceed with the upgrade.  The root disk may be mirrored
again after the upgrade.

From the Xinuos technical article database, record 109956. Reproduced with permission. The original is at www.sco.com/ta/109956, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.