Technical article 105457

Using lpadmin to mount a form and test alignment hangs with SCO OpenServer 5.0.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

After setting up a form, and then attempting to verify form alignment on a printer with the following command:

/usr/lib/lpadmin -p <printer_name> -f <form_name> -M -a
the lpadmin command hangs.  Using the <Del> key will kill the
lpadmin command.

This can happen on both SCO OpenServer 5.0.2 systems and SCO OpenServer 5.0.0 systems with Release Supplement 500d and the SCO Networking Supplement 1.0.0 installed.

Solution

This has been reported to SCO Engineering.

From the Xinuos technical article database, record 105457. Reproduced with permission. The original is at www.sco.com/ta/105457, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.