Technical article 110691

Using Morning Star PPP, what does the error "Missed ALLSTATIONS, flushing frame" mean?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

In my Morning Star PPP logfile, /usr/adm/pppd.log, I sometimes see
the error "Missed ALLSTATIONS, flushing frame".  What does this
error mean?

Cause

The "Missed ALLSTATIONS" error is a packet framing error.  Any
PPP packet sent over the modem is encapsulated inside an HDLC
(High-level Data Link Control) frame, and sent to the "all-stations
broadcast address" (0xFF).  If you receive what purports to be a
PPP packet but it doesn't have that address in its header, the
stack assumes it is bad data and discards it.

Solution

Check that hardware flow control is set (RTS/CTS), and that the serial port and modem speeds match the hardware's capabilities. All of these settings can be done through the Modem Manager and Serial Manager in SCOadmin.

See also

Manual page pppd(MST_PPP), RFC1662.

From the Xinuos technical article database, record 110691. Reproduced with permission. The original is at www.sco.com/ta/110691, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.