Problem
Using pppattach(ADMN) to bring up my outgoing PPP link, the attempt
fails immediately without any errors. For instance, I might use
the following command to bring up my "test1" manual outgoing PPP
connection:# pppattach test1If the command immediately returns to a prompt, but the modem never dials, check /usr/adm/syslog for an error that looks something like this:
Dial failure host '0.0.0.0' using uucp system 'test1' = SYSTEM NOT IN Systems FILE (-13)
Cause
The uucp name for "test1" is not configured, or the uucp= entry in /etc/ppphosts does not correspond to an entry in /usr/lib/uucp/Systems.
Solution
Make sure the "uucp=" parameter in /etc/ppphosts matches up with an entry in /usr/lib/uucp/Systems.
In the example above, the correct /etc/ppphosts entry would appear similar to this:
0.0.0.0:0.0.0.0 uucp=test1 attach=test1 retry=3 mask=255.0.0.0 \ debug=2 idle=1 tmout=5 nomgc
(The exact options may differ, but make sure the attach name is correct.)
And, the corresponding /usr/lib/uucp/Systems entry would look something like this:
test1 Any ACU Any 18314253502 -\r\d-ogin:-\K\d-ogin:-\K\d-ogin:
pppusername ssword: pppuserpwd(The exact entry may differ, but make sure the sitename matches \ the uucp= name in /etc/ppphosts.)
If making changes to the /etc/ppphosts file, it is a good idea to stop and restart pppd before attempting to bring up the link again:
# kill `cat /etc/pppd.pid`
# /etc/pppdThis is not necessary if your changes are only to the Systems file.
See also
manual pages pppd(ADMN), ppphosts(SFF), Systems(F)ta110195, "How can I debug my PPP dynamic or manual outbound dialup connection?"