Technical article 105311

vectorsinuse(ADM) does not reliably report the vectors in use.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

vectorsinuse(ADM) does not report all the vectors that are currently in use by device drivers configured in the Link kit.

Cause

vectorsinuse(ADM) searches the sdevice(F) file:
/etc/conf/cf.d/sdevice

to determine what vectors are in use by the Link kit. Not all devices recorded in the sdevice file will have a vector listed against them because some devices have their vector dynamically allocated at initialization time.

Solution

This problem has been reported to SCO Engineering.

The combined output of vectorsinuse(ADM) coupled with the output of hwconfig(ADM) will give a more accurate picture of the interrupt vectors in use on your machine.

From the Xinuos technical article database, record 105311. Reproduced with permission. The original is at www.sco.com/ta/105311, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.