Technical article 105141

"WARNING: Cannot connect to APM, error 0x0007" when booting a DeskPro XL6150.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I successfully install SCO OpenServer Release 5.0.x but when I boot the system, this error message is displayed:

WARNING: Cannot connect to APM, error 0x0007 System loaded, press <Return> to start:

Cause

When the system boots, /boot(HW) and the kernel access the BIOS-APM. When /boot runs, it executes any 'apm.<cmds>=xxx' lines that are found in the /etc/default/boot file.

Solution

          Boot the system to single-user Mode.  Using vi, edit the
	  /etc/default/boot file.  Add 'apm.connect=no' to the end of the
	  line indicated by the 'DEFBOOTSTR=' entry.  Reboot the system.
	  For additional information, see the manual page for apm.
Here is a sample /etc/default/boot file:

DEFBOOTSTR=hd(40)unix swap=hd(41) dump=hd(41) root=hd(42) apm.connect=no AUTOBOOT=YES FSCKFIX=YES MULTIUSER=YES PANICBOOT=NO MAPKEY=YES SERIAL8=NO SLEEPTIME=0 BOOTMNT=RO

See also

Manual page: apm(HW)

From the Xinuos technical article database, record 105141. Reproduced with permission. The original is at www.sco.com/ta/105141, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.