Technical article 104983

What Adaptec 1510 or 1520 chipsets work with the "spad" driver?

OpenServer 5.0.0

Written · Last revised

Problem

What Adaptec 1510 or 1520 chipsets work with the "spad" driver ?

Solution

If you are using one of the following:

SCO UNIX System V/386 Release 3.2 Operating System Version 4.2 SCO Open Desktop Lite Release 3.0 SCO Open Desktop Release 3.0 SCO Open Server Network System Release 3.0 SCO Open Server Enterprise System Release 3.0

The "spad" driver was originally tested with 1510's and 1520's that used the AIC 6260 chipset.

Later 1520's use the AIC 6360 chip-set, which are reported work with the "spad" driver when in AIC 6260 emulation mode.

Adaptec can provide the "smad" driver that will support the AIC 6360 in its native mode, which can be used on the releases listed above.

If you are using one of the following:

SCO OpenServer Enterprise System Release 5.0.0 SCO OpenServer Desktop System 5.0.0 SCO OpenServer Host System Release 5.0.0

The Advanced Hardware Supplement (AHS) 5.2 contains the "smad" driver, which replaces the "spad" driver, and supports both the AIC 6260 and the AIC 6360.

See also

AHS 5.1 Release Notes

From the Xinuos technical article database, record 104983. Reproduced with permission. The original is at www.sco.com/ta/104983, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.