Technical article 101288

What are the different protocols for NetWare, and which ones does SCO support?

OpenServer 5.0.0

Written · Last revised

Problem

What are the different protocols for NetWare, and which ones does SCO support?

Solution

IPX - Internetwork Packet Exchange:  This protocol defines the
addressing that distinguishes each node on a network and
provides datagram (connectionless) transport services.  This
protocol is supported in SCO OpenServer 5.0.0 and SCO UnixWare
2.01.
SPX - Sequenced Packet Exchange:  This protocol provides
connection-oriented transport services.  To run SPX, you
must be running IPX.  This protocol is supported in SCO
OpenServer 5.0.0 and SCO UnixWare 2.01.
RIP - Routing Information Protocol:  This facilitates the
exchange of routing information on the network and is
supported within SCO OpenServer 5.0.0 and SCO UnixWare 2.01.
SAP - Service Advertising Protocol - This allows
service-providing nodes on the network to advertise their
services and addresses.  This protocol is supported in SCO
OpenServer 5.0.0 and SCO UnixWare 2.01.

NVT - Novell Virtual Terminal Protocol - This allows a client to establish a terminal mode connection to the server. NVT depends on the IPX service provider; to run NVT, you must be running IPX. This protocol is supported in SCO OpenServer 5.0.0 and SCO UnixWare 2.01.

NCP - NetWare Core Protocol - This defines connection control
and service requests required for file, bindery and NDS
requests between a client and a NetWare server.  The NCP
protocol requires IPX to be running.  This protocol is
supported in SCO OpenServer 5.0.0 and SCO UnixWare 2.01.
SPX II - This is a version of SPX which uses window sizes
to allow more than one packet outstanding at one time.  It
is fully backwards compatible with SPX.  SPX II requires IPX
to be running. SCO does not support this protocol in SCO
OpenServer 5.0.0.  SPX II is supported in SCO UnixWare 2.01.

NVT 2 - This protocol provides terminal emulation over SPX. SCO does not support this protocol in SCO OpenServer 5. NVT 2 is supported in SCO UnixWare 2.01.

NLSP - NetWare Link State Protocol:  This is Novell's next
generation routing protocol.  Unfortunately, this protocol is
implemented in such a way that it is heavily dependent on
native NetWare; thus, it is not supported in SCO OpenServer 5.0.0
or SCO UnixWare 2.01.  SCO is working with Novell to ensure
that this protocol will be supported in the future.
NCP Packet Burst Protocol - This allows multiple data packets
to be sent or received at a time during file read and write
operations with a NetWare server.  SCO does not support this
protocol in SCO OpenServer 5.0.0 or SCO UnixWare 2.01.

From the Xinuos technical article database, record 101288. Reproduced with permission. The original is at www.sco.com/ta/101288, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.