Technical article 104950

What are the guidelines for scaling my system to the number of users I have?

OpenServer 5.0.0

Written · Last revised

Problem

Are there general guidelines I can use to scale my SCO system for a given number of users?

Solution

Because the needs of one site will vary greatly from the needs
of another, providing absolute guidelines for a particular system
installation is not possible.  However, it is possible to provide
a starting place from which to work.  This starting place should be
looked at as a minimal platform that will need to be adjusted for
your specific installation.  These guidelines should not be used
as a substitute for specific system tuning.

Three example types of systems are addressed:

(A) Low-intensity character-based systems. This type of system
typically has 32 users or less and is non-networked. Users are
connecting directly to a machine via character-based terminals on
a multiport board.  There are less than 5 printers attached to the
system.  Application programs are not memory-hungry or processor
intensive.  There is little or no application development going on
in this environment.
(B) High-intensity character-based systems.  This type of system
typically has 32 or more users and is often networked.  Users may
be directly connected via character based terminals on a multiport
board or terminal server, or may be telneting into the server from
a PC. The system has 5 or more printers directly or indirectly
connected to it.  Application programs are processor intensive,
such as transaction processing (accounting, database, cash register)
or busy development environments.  This is the sort of system for
which you may want to consider having a multi-processor machine.

(C) Graphically-based systems. This type of system has a variable numbers of users who are directly or indirectly attached to the system, either via PCs running X server software or X terminals. The environment is networked and most important application programs are graphically based. This is the sort of system for which you may want to consider having a multi-processor machine.

Budgeting for RAM - Comfortable minimums:

Low-intensity character-based: 16MB RAM base, plus 512KB per user.

High-intensity character-based: 32MB RAM base, plus 1MB per user.

Graphically-based: 32MB RAM base, plus 8MB per user.

Budgeting for Disk Space - Bare minimums:

Low-intensity character-based: 200MB plus 5MB per user.

High-intensity character-based: 300MB plus 7MB per user.

Graphically-based: 300MB plus 10MB per user.
Resource allocations (swap space, pseudo-ttys, c-lists):
Swap space minimums:

Low-intensity character-based: swap should be one and a half times greater than RAM.

High-intensity character-based, graphically-based: swap should be three times RAM.

Pseudo-ttys:
Low-intensity character-based: 3 pttys per user.
High-intensity character-based: 6 pttys per user.
Graphically-based: 10 pttys per user.
C-lists:

10 per user, or 10 times the number of pttys you have allocated, whichever is greater.

NOTE:     Many application program vendors have specific resource allocation
          requirements and performance tuning suggestions which are included
          in the Release Notes or configuration guides. Consult your
          application vendor for specific guidelines.

See also

TA103492, "Tuning large systems for performance"

TA103815, "Configuring the SCO UNIX 32v4 serial driver for high throughput"

TA107228, "Large document for tuning SCO UNIX and SCO Open Desktop kernels"

Gina Miscovich and David Simons', The SCO Performance Tuning Handbook.

From the Xinuos technical article database, record 104950. Reproduced with permission. The original is at www.sco.com/ta/104950, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.