Technical article 114343

What backup solutions are available for SCO Unix?

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.1UnixWare 7.1.3UnixWare 7.1.4Open UNIX 8

Written · Last revised

Problem

What backup solutions are available for SCO Unix?

Solution

There are a number of popular backup solutions available for use with OpenServer5&6/UnixWare7/SCO Open UNIX 8 including:

- BackupEDGE from Microlite ( http://www.microlite.com/ )
http://www.microlite.com/Downloads/downloads.html

Please note that Version 2 licenses will not work on BackupEdge Version 3.

- NetVault from BakBone Software ( http://www.bakbone.com/ )
http://www.bakbone.com/products/downloads/

Please note: If using the "adpu320" HBA driver ensure you are using minimum version 7.1.3d available from:

https://ftp.scoexpert.com/unixware7/drivers/storage
- LONE-TAR from Cactus International ( http://www.cactus.com/ )
- Arkeia from Knox Software ( http://www.knox-software.com/ )
- BRU from EST Inc ( http://www.estinc.com/ )
Some of these products will also have versions for other flavours of
SCO Unix, such as SCO OpenServer 6.0.0 or 5.0.7.  Check with each
manufacturer for versions of SCO Unix supported.
NOTES:    In addition to SCO's own Emergency Recovery Media which can be
          produced, SCO has it's own backup solution's including:

A simple backup solution using "cpio" or "tar", see:

For OpenServer6/UnixWare7, see TA116586

Before installing it is recommended to test the tape hardware first before installation as:

# sdiconfig -l
For OpenServer5, see TA116586
To Test:
-------
Ensure that there is TAPE unit detected.
To test backup:
# cd /
# find etc -print | cpio -ocv -O/dev/rmt/ctape1
To test restore:
# cd /tmp
# cpio -ivdumc -I/dev/rmt/ctape1
# rm -r /tmp/etc

To determine the most efficient block size supported by your tape run the same tests but introduce the -C65536 option to set a block size of 64k, for example:

# find etc -print | cpio -ovc -C65536 -O/dev/rmt/ctape1

You will need to include the same -C65536 when restoring.

You can try smaller block sizes, such as 32k, 16k, etc...

NOTES:    When using a Tape Auto-CHANGER on OSR6/UW7 test the hardware first
          with:
# sdiconfig -l

Ensure that there is a CHANGER unit detected.

To test run:
# mccntl -s

to see the status of the changer and then to load and eject tapes prior to a backup test above, run:

# mccntl -l [element]             ; to load a tape
# mccntl -e [element]             ; to eject a tape

See also

- For Software Mirroring on the same server, consider:

For OpenServer6:
http://osr600doc.xinuos.com/en/FS_admin/VeritasC.overview.html
For UnixWare7:
http://uw714doc.xinuos.com/en/FS_admin/VeritasC.overview.html

- For tools to Mirror between servers, see:

TA111764
TA125883

- For 3rd Pparty Mirroring Technology between different servers visit:

http://www.sire.co.uk
http://www.1776soft.com/ (SCO OpenServer5)
- For High Availability Options, see:

What are the requirements for a SCO High Availability 'Clustered' Solution at TA126553

From the Xinuos technical article database, record 114343. Reproduced with permission. The original is at www.sco.com/ta/114343, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.