Technical article 107641

What IP addresses can I use for an internal (private) network?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

I am building an internal, or private, network and would like to use addresses that are not currently used on the Internet.

For instance, some hosts do not require access to hosts in other
companies or the Internet at large.  In other cases, hosts may
need access to a limited set of outside services (such as e-mail,
FTP, news, and/or remote login, and so on) that can be handled by
application layer gateways.

Solution

The following three blocks of IP addresses are currently reserved for private networks:

10.0.0.0        -   10.255.255.255
172.16.0.0      -   172.31.255.255
192.168.0.0     -   192.168.255.255

Note that the first block is nothing but a single class A network number, while the second block is a set of 16 contiguous class B network numbers, and the third block is a set of 255 contiguous class C network numbers.

There is no guarantee that these IP addresses will remain "reserved" for private networks indefinitely.

See also

Text of RFC1597

From the Xinuos technical article database, record 107641. Reproduced with permission. The original is at www.sco.com/ta/107641, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.