Technical article 105014

What is contained in Support Level Supplement (SLS) OSS424A?

OpenServer 5.0.0

Written · Last revised

Problem

What is contained in Support Level Supplement (SLS) OSS424A, the Keyboard BTLD?

Solution

SLS OSS424A contains the "kbp" BTLD which modifies a constant in the console driver that controls the frequency at which the keyboard is polled.

The attached cover letter further describes SLS OSS424A.

See also

ta109615, "What is SLS CMW487A for SCO CMW+ Release 3.0.1?"

Dear SCO Customer,
This Support Level Supplement (SLS) OSS424A will allow the installation of
SCO system software on systems implemented with faster CPUs and an AMI
keyboard BIOS.  In this case, faster CPUs can generally be defined as
systems employing a Pentium processor executing at 75Mhz or faster.  The
problem occurs when the keyboard locks up and no longer handles keyboard
events.

SLS OSS424A can be installed on these SCO products:

SCO MPX Release 3.0 SCO SMP (Symmetrical Multiprocessing) Release 5.0.0 SCO Open Server Enterprise System Release 3.0 SCO Open Server Network System Release 3.0 SCO Open Desktop Release 3.0 SCO Open Desktop Lite Release 3.0 SCO UNIX System V/386 Release 3.2 Operating System Version 4.2 SCO OpenServer Enterprise System Release 5.0.0 SCO OpenServer Desktop System Release 5.0.0 SCO OpenServer Host System Release 5.0.0

A Boot Time Loadable Driver (BTLD), the "kbp" BTLD, is contained in SLS
OSS424A.  BTLDs are used by entering a command at the "Boot:" prompt.
To properly install this BTLD, follow these directions:

If the kbp BTLD is the only BTLD being used, use this command:

Boot
: defbootstr link="kbp"

If more than one BTLD will be used, use this command:

Boot
: defbootstr link="kbp other-btld"

For example, if the system software is installed from a CD-ROM on an Adaptec 2940, this command line would be used:

Boot
: defbootstr link="kbp alad"

If you have SCO OpenServer Release 5, and are using another BTLD that requires you to use ahslink, use this command:

Boot
: defbootstr ahslink="kbp other-btld"

For example, if the system software is installed from a CD-ROM on the IDE bus, this command line would be used:

Boot
: defbootstr ahslink="kbp ATAPI"

The message "Characteristic 'B' not supported; ignored" may be displayed. This message can be safely ignored and will not adversely affect the operation of the BTLD.

Note:  Wait for the installation program to prompt for disk changes.  Do not
change floppies until instructed.
When a BTLD is installed, the appropriate components are installed into the
link kit.  By placing the components in the link kit all subsequent kernel
links will contain the BTLD modules.  Therefore, when a driver is added or
removed from the system, the proper BTLD components continue to be present
in newly built kernels.
If your system has already been installed and you want to add the kbp package,
use the "installpkg" command.  Insert the kbp BTLD disk, SLS OSS424A, in your
floppy drive and type "installpkg."
After the driver is installed, activate it by editing the file
/etc/conf/sdevice.d/kbp.  The file will contain one line like this:
kbp    N     1     5     0     0     0     0     0     0

Change the "N" to a "Y" so it looks like this:

kbp    Y     1     5     0     0     0     0     0     0
Link a new kernel by typing /etc/conf/cf.d/link_unix.  The new driver will
take effect the next time you reboot.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

We appreciate your business.
SCO Support Services

From the Xinuos technical article database, record 105014. Reproduced with permission. The original is at www.sco.com/ta/105014, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.