Technical article 117533

What is CSSA-2002-SCO.10, concerning "OpenSSH channel code vulnerability"?

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

A known problem exists in the channel code of OpenSSH versions 2.0 through 3.0.2. Existing users can use this limitation to gain root privileges. The ability to exploit this vulnerability without an existing user account has not yet been proven, but it is considered possible. A malicious SSH server could also use this limitation to exploit a connecting vulnerable client.

Solution

          Please see the Security Advisory below.
___________________________________________________________________________
SCO, Inc. Security Advisory
Subject:                OpenServer: OpenSSH channel code vulnerability
Advisory number:        CSSA-2002-SCO.10
Issue date:             2002 March 12
Cross reference:
___________________________________________________________________________
0. Revision History
2002 March 20
This package requires the zlib and PRNGD libraries to install and  run
properly. Section 4.3 is updated below to include these packages.
1. Problem Description

A known problem exists in the channel code of OpenSSH versions 2.0 through 3.0.2.

Existing users can use this limitation to gain root privileges. The ability to exploit this vulnerability without an existing user account has not yet been proven, but it is considered possible. A malicious SSH server could also use this limitation to exploit a connecting vulnerable client.

2. Vulnerable Supported Versions
Operating System        Version         Affected Files
------------------------------------------------------------------
OpenServer              <= 5.0.6a       all ssh distribution files
3. Workaround
None.
4. OpenServer
4.1 Location of Fixed Binaries
ftp://stage.sco.com/pub/security/openserver/CSSA-2002-SCO.10/
4.2 Verification
MD5 (openssh-3.1p1-VOLS.tar) = 8e99c00aa99c12b48cc4fcc4578c9923
MD5 is available for download from:
ftp://stage.sco.com/pub/security/tools/
4.3 Installing Fixed Binaries

Upgrade the affected binaries with the following commands:

Download openssh-3.1p1-VOLS.tar to the /tmp directory
# cd /tmp
# tar xvf openssh-3.1p1-VOLS.tar
Run the custom  command, specify an install from media images,
and specify the /tmp directory as the location of the images.

NOTE: The zlib and PRNGD packages are required to be installed before OpenSSH will work. These packages can be downloaded from:

ftp://ftp2.sco.com/pub/skunkware/osr5/vols/zlib-1.1.4-VOLS.tar
ftp://ftp2.sco.com/pub/skunkware/osr5/vols/prngd-0.9.23-VOLS.tar

They should be installed using the same procedure as the OpenSSH package.

5. References
http://www.pine.nl/advisories/pine-cert-20020301.txt

This and other advisories are located at:

[link no longer available]

This advisory addresses SCO Security internal incidents sr861336, fz520315, erg711984.

6. Disclaimer
SCO, Inc. is not  responsible for the misuse
of  any of  the  information we provide on  our website and/or
through our  security advisories. Our advisories are a service
to  our customers  intended to promote secure installation and
use of SCO products.
7. Acknowledgements
        Joost  Pol  <joost@pine.nl>  discovered  and  researched  this
        vulnerability.
___________________________________________________________________________

From the Xinuos technical article database, record 117533. Reproduced with permission. The original is at www.sco.com/ta/117533, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.