Technical article 125710

What is OSS663a, the LPD supplement for OpenServer 5.0.6 for OSS646?

OpenServer 5.0.6

Written · Last revised

Problem

What is OSS663a, the LPD update for OpenServer 5.0.6 for OSS646?

Solution

Dear SCO Customer,

Support Level Supplement (SLS) OSS663A, the LPD supplement for OpenServer 5.0.6 with OSS646, addresses a problem that occurs when either OSS646a or OSS646b is installed on an OpenServer 5.0.6 system with lpd printers defined.

With OSS646 installed, lpd has a problem parsing /etc/printcap that results in a lot of entries in the syslog about unknown printer, similar to this:

Jul 24 15:16:27 scosysv lpd[9160]: unknown printer: 026
SLS OSS663A contains this file:
/usr/lib/lpd
  Software Notes and Recommendations
  ----------------------------------
SLS OSS663A should only be installed on:

SCO OpenServer Release 5.0.6 with Release Supplement 506A (rs506a) and OSS646

Installation Instructions
-------------------------

1. Download the OSS663A media image file from:

https://ftp.scoexpert.com/openserver5/oss663a

Place the file in the /tmp directory, and rename the file by typing the command:

mv /tmp/oss663a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install,
   choose the local   machine and then "Continue".
   In the "Select Media" menu, pull down the "Media
   Device" menu. Select "Media Images", then choose
   "Continue".

6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK".

7. When prompted to select software to install, make sure
   that the "OSS663A" entry is highlighted.  Choose
   "Install".
8. Installation of SLS OSS663A is now complete.  To exit
   the Software Manager, select "Exit" from the "Host" menu.

9. A kernel relink occurred during this process and it will be necessary to reboot the server for the supplement to take effect.

Removal Instructions
--------------------

NOTE Patches must be rolled back in the reverse order in which they were installed on a per-component basis.

To remove SLS OSS663A from SCO OpenServer 5.0.6, follow these steps:

1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS663A: Processor Supplement for OpenServer
   5.0.6".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS663A is now complete.

6. A kernel relink occurred during this process and it will be necessary in order to reboot the server.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 125710. Reproduced with permission. The original is at www.sco.com/ta/125710, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.