Problem
What is OSS666a, the libc supplement for OpenServer Release 5.0.6?
Solution
What follows is the cover letter for OSS666a:
Dear SCO Customer,Support Level Supplement (SLS) OSS666A, the libc supplement for OpenServer Release 5.0.6a, addresses a memory leak when using the catopen(S) routine to open a message catalog.
SLS OSS666A contains a new version of libc that fixes the leak.
Software Notes and Recommendations
----------------------------------
SLS OSS666A can be installed on:SCO OpenServer Release 5.0.6 with Release Supplement 506A (rs506a) SCO OpenServer Release 5.0.5 with Release Supplement 505A (rs505a)
NOTE: Please note that OSS666A is not compatible with OSS646C.
If OSS646C is already installed, OSS666A will be installed and as a result when the server boots you could see the following on the system boot up:
/etc/getty ttyx respawning too rapidly.And via telnet:dynamic linker: telnetd: relocation error: symbol not found: _sys_errlist
Access is only via the console via the X interface where you can run "custom" to remove OSS666A, then relink the kernel and reboot.
This issue has been reported to SCO Engineering.
NOTE: SCO OpenServer Release 5.0.5 is no longer supported by SCO. Customers using this release are encouraged to upgrade to OpenServer Release 5.0.7.
Installation Instructions
-------------------------1. Prepare the media for installation.Download the OSS666A VOL files from the:
https://ftp.scoexpert.com/openserver5/oss666a/directory on SCO's ftp site. Place the files in the /tmp directory
on the local server. The files should include:VOL.000.000
VOL.001.000
oss666a.ltr2. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Pull down the "Software" menu and select "Install New".
4. When prompted for the host from which to install, choose the local machine and then "Continue".
5. In the "Select Media" window, pull down the "Media Device" menu. Select "Media Images", then "Continue".
6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL files in step 1) and then select "OK".
7. When prompted to select software to install, ensure that the
"OSS666A" entry is highlighted. Choose "Install".8. Once the installation finishes, select "Exit" from the "Host" menu.
9. We strongly recommend that you reboot as soon as possible after installing OSS666A.
Removal Instructions
--------------------To remove the patch:1. Log in as root.2. Execute the command:# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Highlight OSS666A.4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, select "Exit" from the "Host" menu.
6. Reboot the machine. (The effects of SLS OSS666A on the dynamic
shared C language library are not completely removed until
you reboot.)Removal of SLS OSS666A is now complete.
If you have questions regarding this SLS or the product on which it is installed please contact your software supplier.