Problem
The COFF linker fails to search the second default directory for
required libraries. Most notably, this causes the installation
of Oracle7 to fail. Solution
Support Level Supplement (SLS) OSS459A, the COFF Linker Supplement, corrects this problem. This SLS was created for Oracle7.
See the attached cover letter that accompanies this SLS for more information, including installation instructions.
Dear SCO Customer,The enclosed Support Level Supplement (SLS) OSS459A, the COFF Linker Supplement, resolves a problem found in the COFF Linker which ships in the OpenServer 5.0.4 link kit. The linker failed to search the second default directory for required libraries. This SLS was created for Oracle7.
Note: After installing OSS459A, this problem will still exist in the
COFF Linker included in the OpenServer 5.0.4 Development System.A fix for all copies of the COFF linker will ship in a future Release Supplement; it is _not_ included in Release Supplement 5.0.4C or earlier.
RELEASE INFORMATIONSLS OSS459A is intended for use on these products:
SCO OpenServer Host System Release 5.0.4 SCO OpenServer Desktop System Release 5.0.4 SCO OpenServer Enterprise System Release 5.0.4 SCO OpenServer Internet FastStart Release 5.0.4
INSTALLATION AND REMOVAL INSTRUCTIONSThe instructions that follow enable you to both install the patch from distribution media or media image, as well as configure the patch to be installed from a remote SCO OpenServer Release 5 system over a TCP/IP network.
I. INSTALLING THE PATCH1. Log in as root.2. If you are installing this SLS from a media image, there is a
file called oss459a.Z. Uncompress this file and copy it to the
/tmp directory and name it VOL.000.000:# uncompress oss459a.Z# cp oss459a /tmp/VOL.000.0003. Invoke the Software Manager by double clicking on the Software Manager
icon on the desktop, or by executing the command:
# scoadmin software4. Pull down the "Software" menu and select "Install New..."5. You will see the "Begin installation" menu.If this is a local installation from a media image file:
- Select the local machine name, then choose "Continue".
- In the "Select Media" menu, pull down the "Media Device" menu and select "Media Images", then choose "Continue".
- In the "Enter Image Directory" menu. Enter /tmp and choose "OK".If this is a local installation from floppy disk media:
- Select the local machine name, then choose "Continue".
- In the "Select Media" menu, pull down the "Media Device" menu and select "Floppy Disk Drive", then choose "Continue".
If this is an installation from a network installation server: (See notes below on how to configure a network installation server.)
- Select "From Another Host", then choose "Continue".
- In the "Select Source" menu provide the name of the installation server, as well as the password of the "swadmin" user on the installation server, then choose "Continue".
- In the "Select Media" menu, pull down the "Media Device" menu and select "Hard Disk", then choose "Continue".
6. You will see the "Install Selection" menu. Select the line that reads:
"COFF Linker Supplement (ver OSS459A)", then choose "Install".7. You will see the "Installation Progress" window. If the patch installs
successfully, you will see a "Message" window that states "Installation
complete". Choose "OK". You are then returned to the main Software
Manager window.8. Installation of patch OSS459A is now complete.
To exit the Software Manager select "Exit" from the "Host" menu.II. NOTES ON NETWORK INSTALLATIONRather than installing OSS459A from a media image or from a floppy disk, it is possible to install it over the network. In order to do this, another OpenServer 5.0.x system on the network needs to be configured as a network install server. This is accomplished by:
- establishing an account for "swadmin" on the designated install server.
- loading (or installing) OSS459A on the designated install server Note: OSS459A will only install on OpenServer 5.0.4 systems.
The steps for "Loading" a patch on an installation server are dependent upon the version of OpenServer running on the server:
Loading OSS459A on 5.0.4:If the patch is also required to be installed on the installation server, then follow the same steps 1-8 for installing the patch as described above; a side effect of installing the patch is that it gets loaded too. If the patch is not required to be installed on the installation server, then follow the same steps 1-8 for installing the patch as described above except modify step 6 to perform just a load rather than a full install.
Modified step 6:6. You will see the "Install Selection" menu. The window will highlight
the line: "COFF Linker Supplement (ver OSS459A)". At this point, choose
"More Options". In the next window, select "Load Only", then choose
"Install".Loading OSS459A on 5.0.0 or 5.0.2:Perform the following steps:1. Log in as root.2. If you are installing this SLS from a media image, there is a
file called oss459a.Z. Uncompress this file and copy it to the
/tmp directory and name it VOL.000.000:# uncompress oss459a.Z# cp oss459a /tmp/VOL.000.0003. Invoke the Software Manager by double clicking on the Software Manager
icon on the desktop, or by executing the command:# scoadmin software4. Pull down the "Software" menu and select "Patch Management-->Load Patch".5. You will see the "Begin Load Patch" menu.If this is a local installation from a media image file:
- Select the local machine name, then choose "Continue".
- In the "Select Media" menu, pull down the "Media Device" menu and select "Media Images", then choose "Continue".
- In the "Enter Image Directory" menu. Enter /tmp and choose "OK".If this is a local installation from floppy disk media:
- Select the local machine name, then choose "Continue".
- In the "Select Media" menu, pull down the "Media Device" menu and select "Floppy Disk Drive", then choose "Continue".
6. You will see the "Load Patch Preference" menu and the name of the patch
will appear: "COFF Linker Supplement (version OSS459A)" together with
a prompt asking whether a full or partial installation is required.
Choose "Full".7. You will see the "Load Patch Progress" window. If the patch loads
successfully, you will see a "Message" window that states "Load
Patch complete". Choose "OK". You are then returned to the main
Software Manager window.8. Loading of patch OSS459A is now complete. To exit the Software Manager select "Exit" from the "Host" menu.
III. PATCH REMOVALNote: Patches must be rolled back in the reverse order in which they were
installed on a per-component basis. Hence, if the OSS459A patch is not the
most recent patch applied to the UNIX component of the product, you will have
to roll back all patches applied after the OSS459A patch prior to rollback of
the OSS459A patch.1. Log in as root.2. Invoke the Software Manager by double clicking on the Software Manager
icon on the desktop, or by executing the command:# scoadmin software3. The Software manager will display all the software currently installed
on the local machine. Select "COFF Linker Supplement (ver OSS459A), pull
down the "Software" menu and select "Remove Software..."4. In the "Confirm Selected Software" menu, check that the software about
to be removed is the "COFF Linker Supplement" and then choose "Remove".7. You will see the "Rollback Progress" window, as the system performs
the rollback of the patch.8. You will see the "Removal Progress" window. If the patch is removed
successfully, you will see a "Message" window that states "Removal
complete". Choose "OK". You are then returned to the main
Software Manager window.9. Removal of patch OSS459A is now complete.
To exit the Software Manager select "Exit" from the "Host" menu.If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.
We appreciate your business.SCO Support Services