Technical article 109374

What is SLS OSS475A, the lex/libl Development System Patch?

OpenServer 5.0.4

Written · Last revised

Problem

I am trying to run a program that was developed with the SCO OpenServer Release 5.0.4 Development System and which used dynamic libraries (DLLs). Attempting to run this program generates the following error:

dynamic linker: [binary name]: can't set protections on segment of length [hex number] at [hex number]

where "[binary name]" is the name of the program being executed, and "[hex number]" is the length of the segment and the address of the segment.

NOTE: This error message may also be due to other causes, such as using non-Position Independent Code in ELF objects that make up a dynamic library. SLS OSS475A is intended for customers who receive this error message using the OpenServer 5.0.4 Development System only, particularly if they are using the lex(CP) command.

Solution

Support Level Supplement (SLS) OSS475A, the lex/libl Development System Patch, corrects some instances of this problem.

See the attached cover letter that accompanies this SLS for more information, including installation instructions.

Dear SCO Customer,

Support Level Supplement, (SLS) OSS475A, the lex/libl Development System Patch, corrects a dynamic linker problem with the SCO OpenServer 5.0.4 Development System. This problem can generate the following error at runtime:

dynamic linker: [binary name]: can't set protections on segment of length [hex number] at [hex number]

where "[binary name]" is the name of the program being executed, and "[hex number]" is the length of the segment and the address of the segment.

This problem _only_ exists on the OpenServer 5.0.4 Development System. The problem does not occur with the 5.0.0 or 5.0.2 Development Systems, although the same error message may be generated by other causes. SLS OSS475A is only intended for, and will only install on, the OpenServer 5.0.4 Development System.

This SLS is recommended for any customer who uses lex(CP) in ELF binaries. If this patch is installed, any lex-generated code will need to be regenerated since previously generated code will no longer compile. This is not usually an issue because most makefiles include lex in the build process.

Software Notes and Recommendations
----------------------------------

SLS OSS475A is intended for use on SCO OpenServer Development System Release 5.0.4 and will not install on other releases of the OpenServer Development System.

I. INSTALLING SLS OSS475A
1. Prepare the media for installation.

Download the OSS475A media image file (oss475a file), place the file in the /tmp directory and rename the file by typing the following commands:

mv /tmp/oss475a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install, choose the local machine and then "Continue".

5. When prompted to select the media device:

If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.

If you are installing this SLS from media images per step 1, select
"Media Images", then "Continue".  When prompted for the "Image
Directory", enter "/tmp" (or the directory where you placed the VOL
file in step 1) and then select "OK".

6. When prompted to select software to install, ensure that the "OSS475A" entry is highlighted. Choose "Install".

7. Once the installation finishes, quit the Software Manager. Installation of SLS OSS475A is now complete.

II. REMOVING SLS OSS475A
Note: Patches must be rolled back in the reverse order in which they were
installed on a per-component basis.  Hence, if the "lex/libl Development
System Patch" patch is not the most recent patch applied to the UNIX
component of the product, you will have to roll back all patches applied
after the "lex/libl Development System Patch" patch prior to rollback of
the "lex/libl Development System Patch" SLS.
1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS475A: lex/libl Development System Patch". 4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS OSS475A is now complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

We appreciate your business.
SCO Support Services

From the Xinuos technical article database, record 109374. Reproduced with permission. The original is at www.sco.com/ta/109374, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.