Technical article 109638

What is SLS OSS480A, the HTFS Supplement for OpenServer 5.0.4?

OpenServer 5.0.4

Written · Last revised

Problem

I am getting extremely slow performance on filesystems of 18GB or greater, and/or the system panics with the following message:

PANIC: HTFS: Trap type E in htdirbread

Solution

Support Level Supplement (SLS) OSS480A, the HTFS Supplement for OpenServer 5.0.4, provides a new HTFS driver that resolves known problems with the HTFS filesystem.

See the attached cover letter that accompanies this SLS for more information, including installation instructions.

Dear SCO Customer,

Support Level Supplement (SLS) OSS480A, the HTFS Supplement for OpenServer 5.0.4, provides a new HTFS driver that resolves the following known problems with the HTFS filesystem on SCO OpenServer Release 5.0.4:

- Extremely slow performance on HTFS filesystems of 18GB or greater containing large numbers of files

- PANIC: HTFS: Trap type E in htdirbread
INSTALLATION AND REMOVAL INSTRUCTIONS
I. PRIOR TO INSTALLING SLS OSS480A

Ensure that the SCO OpenServer Release Supplement 5.0.4c (rs504c) has been applied on the system BEFORE loading and applying this SLS.

Release Supplement 5.0.4c can be downloaded from the SCO Online Support
(SOS) system.  The relevant ftp site is:
https://ftp.scoexpert.com/Supplements/rs504c

You can also access this same site via the SCO web site http://www.sco.com; downloadable software from SCO Services can be viewed and chosen at:

http://www.sco.com/support/ftplists/osr5list.html
II. INSTALLING SLS OSS480A
1. Prepare the media for installation.

Download the OSS480A media image file (oss480a.Z), place the file in the /tmp directory, uncompress and and rename the file by typing the following commands:

uncompress /tmp/oss480a.Z
mv /tmp/oss480a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install, choose the local machine and then "Continue".

5. When prompted to select the media device:

If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.

If you are installing this SLS from media images per step 1, select
"Media Images", then "Continue".  When prompted for the "Image
Directory", enter "/tmp" (or the directory where you placed the VOL
file in step 1) and then select "OK".

6. When prompted to select software to install, ensure that the "HTFS Supplement for OpenServer 5.0.4" entry is highlighted. Choose "Install".

7. Once the installation finishes, quit the Software Manager. Installation of OSS480A is now complete. You must reboot your system for these changes to take effect.

III. REMOVING SLS OSS480A
Note: Patches must be rolled back in the reverse order in which they were
      installed on a per-component basis. The HTFS Supplement for OpenServer
      5.0.4 (OSS480A) consists of a patch to the SCO link-kit component. If
      this component was patched after OSS480A was installed, then you will
      have to roll back the later patch before you can roll back the SLS
      OSS480A patch.
1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "The HTFS Supplement for OpenServer 5.0.4".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS480A is now complete. You must reboot your system for the removal to take effect.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

We appreciate your business.
SCO Support Services

From the Xinuos technical article database, record 109638. Reproduced with permission. The original is at www.sco.com/ta/109638, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.