Problem
Some SNMP agents are not completing their initialization
successfully. As an example, the Compaq Insight Manager
application is unable to retrieve information from the
Compaq Insight Manager agent running on SCO OpenServer. Solution
Support Level Supplement (SLS) OSS481A provides a new version of snmpd to correct this problem.
Dear SCO Customer,Support Level Supplement (SLS) OSS481A, the SCO OpenServer SNMP Supplement, contains a replacement snmpd for the SCO OpenServer 5.0.4 and 5.0.2 operating systems.
This SLS fixes a problem with some SNMP agents not being able to initialize successfully. For example, the Compaq Insight Manager application is unable to retrieve information for the Compaq Insight Manager agent and subsequently may log the error message "YouLoseBig" to the Compaq Insight Management agent's log file.
SLS OSS481A is intended for use on these products:
SCO OpenServer Enterprise System Release 5.0.2, 5.0.4 SCO OpenServer Desktop System Release 5.0.2, 5.0.4 SCO OpenServer Host System Release 5.0.2, 5.0.4 SCO OpenServer Internet FastStart Release 5.0.4
I. INSTALLING SLS OSS481A1. Prepare the media for installation.Download the OSS481A media image file (oss481a file), place the file in the /tmp directory, and rename the file by typing the following commands:
mv /tmp/oss481b /tmp/VOL.000.0002. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Pull down the "Software" menu and select "Patch Management".
4. Select "Apply Patch" from the menu.
5. When prompted for the host from which to install, choose the local machine and then "Continue".
6. When prompted to select the media device:
If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 7.
If you are installing this SLS from media images per step 1, select
"Media Images", then "Continue". When prompted for the "Image
Directory", enter "/tmp" (or the directory where you placed the VOL
file in step 1) and then select "OK".7. When prompted to select either a full or partial install of the patch, select "Full".
8. Select "OK" at the "Apply Patch Complete" message, then quit the
Software Manager. You must reboot your system for these changes
to take effect.II. REMOVING SLS OSS481A1. Log in as root.2. Execute the command:# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Pull down the "Software" menu and select "Patch Management".
4. Select "Rollback Patch" from the menu.
5. When prompted to select patched software to rollback, select "SCO TCP/IP" and then "Continue".
6. When prompted to select a patch level to rollback, select "OSS481A:SNMP Supplement" and then "Continue".
7. Confirm you want to rollback the OSS481A SNMP supplement by selecting "Rollback".
8. Select "OK" at the "Rollback of Patch Complete" message.
If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.
We appreciate your business.SCO Support Services