Technical article 110565

What is SLS OSS610B, the E820 Memory Sizing Boot Patch for SCO OpenServer 5.0.5?

OpenServer 5.0.5

Written · Last revised

Problem

E820 BIOS call does not work correctly on SCO OpenServer 5.0.5.

Solution

Support Level Supplement (SLS) OSS610B is a recut containing the true 5.0.6 /boot code.

Support Level Supplement (SLS) OSS610B contains a modified /stand/boot to allow boot to properly interpret the E820 BIOS memory region call.

See the attached cover letter that accompanies this SLS for more information, including installation instructions.

Dear SCO Customer,

Support Level Supplement (SLS) OSS610B, the E820 Memory Sizing Boot Patch for SCO OpenServer 5.0.5, corrects a problem with boot not sizing memory correctly because of a misinterpretation of the results from the E820 BIOS memory region call.

SLS OSS610B consists of a replacement /stand/boot.

Software Notes and Recommendations
----------------------------------

SLS OSS610B should only be installed on:

SCO OpenServer Enterprise System Release 5.0.5 SCO OpenServer Desktop System Release 5.0.5 SCO OpenServer Host System Release 5.0.5

Installation Instructions
-------------------------

1. Download the OSS610B media image file (oss610b file), place the file in the /tmp directory and rename the file by typing these commands:

mv /tmp/oss610b /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install, choose the local machine and then "Continue".

5. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK".

7. When prompted to select software to install, make sure that the "OSS610B" entry is highlighted. Choose "Install".

8. Installation of SLS OSS610B is now complete.  To exit the
   Software Manager, select "Exit" from the "Host" menu.
Removal Instructions
--------------------
Note: Patches must be rolled back in the reverse order in which they were
installed on a per-component basis.  That is, if the E820 Memory Sizing
Boot Patch is not the most recent patch applied to the UNIX component of
the product, you will have to roll back all patches applied after the E820
Memory Sizing Boot Patch prior to rollback of the E820 Memory Sizing Boot
Patch.

To remove SLS OSS610B, take these steps:

1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS610B: E820 Memory Sizing Boot Patch". 4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS OSS610B is now complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 110565. Reproduced with permission. The original is at www.sco.com/ta/110565, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.