Technical article 111541

What is SLS OSS615A, the SCO Merge 5 Kernel Update?

OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

What is contained in SLS OSS615A, the SCO Merge 5 Kernel Update?

Solution

Support Level Supplement (SLS) OSS615A provides updated CD-ROM and floppy diskette drivers as well as an updated license manager required by SCO Merge 5.

See the attached cover letter for more information, including installation instructions.

Dear SCO Customer,

Support Level Supplement (SLS) OSS615A, the SCO Merge 5 Kernel Update, provides updated CD-ROM and floppy diskette drivers as well as an updated license manager required by SCO Merge 5.

Installation Instructions
-------------------------

1. Download the OSS615A media image file (oss615a), place the file in the /tmp directory and rename the file by typing these commands:

mv /tmp/oss615a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for which host to install from, choose the local machine and then "Continue".

5. When prompted to select the media device:

If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.

If you are installing this SLS from media images per step 1, select
"Media Images", then "Continue".  When prompted for the "Image
Directory", enter "/tmp" (or the directory where you placed the VOL
file in step 1, and then select "OK".

6. When prompted to select software full or partial installation, choose "Full".

7. During installation of OSS615A, a new kernel is built with the new CD-ROM and floppy diskette drivers. The changes to these drivers will not take effect until you reboot the system.

8. Log in as root on tty01, and shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, application of the SLS is complete.

Removal Instructions
--------------------
Note: Patches must be rolled back in the reverse order in which they
      were installed on a per-component basis.  SLS OSS615A, the SCO
      Merge 5 Kernel Update, consists of a patch to the SCO Unix component.
      If this component was patched after SLS OSS615A was installed, then
      you will have to roll back the later patch before you can roll back
      the SLS OSS615A patch.
1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS615A: SCO Merge 5 Update".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS OSS615A is now complete.  You must reboot your system for the
   removal to take effect.

6. As root on tty01, shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, removal of the SLS is complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 111541. Reproduced with permission. The original is at www.sco.com/ta/111541, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.