Technical article 111421

What is SLS OSS627A, the Intel Pentium Pro and Pentium II Microcode Driver for SCO OpenServer 5.0.0 and 5.0.2?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I understand that Intel has released fixes to the Pentium II family of processors. How can I get these fixes on my SCO OpenServer Release 5.0.0/5.0.2 system?

Solution

Support Level Supplement (SLS) OSS627A, the Intel Pentium Pro and Pentium II Microcode Driver, provides the proper microcode fixes to apply to the system's Pentium Pro, Pentium II, Pentium II Xeon, or Pentium II Celeron processor. It also adds support for erasure of the Pentium III Processor Serial Number (PSN) and may resolve other Pentium III issues.

See the attached cover letter that accompanies this SLS for more information, including installation instructions.

Dear SCO Customer,
Support Level Supplement (SLS) OSS627A, the Intel Pentium Pro and Pentium II
Microcode Driver, provides support for the downloading of new microcode to
Intel Pentium Pro and Pentium II processors, as well as support for erasure
of the Pentium III Processor Serial Number (PSN).  Other Pentium III issues
may also be addressed by this SLS.

SLS OSS627A is intended for use on these products:

SCO OpenServer Release 5.0.0
SCO OpenServer Release 5.0.2
Installation Instructions
-------------------------

1. Download the OSS627A media image file (oss627a), place the file in the /tmp directory and rename the file by typing these commands:

mv /tmp/oss627a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Apply Patch".

4. When prompted for which host to install from, choose the local machine and then "Continue".

5. When prompted to select the media device:

If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.

If you are installing this SLS from media images per step 1, select
"Media Images", then "Continue".  When prompted for the "Image
Directory", enter "/tmp" (or the directory where you placed the VOL
file in step 1, and then select "OK".

6. When prompted to select software full or partial installation, choose "Full".

7. During installation of OSS627A, you may choose to have the Pentium III Processor Serial Number (PSN) erased. This change is not permanent; each time the system is powered on the PSN is restored, and each time the operating system boots, it is erased (if this option is selected). Your selection can be changed by removing and reinstalling SLS OSS627A.

8. Once the installation finishes, quit the Software Manager.  Installation
   of SLS OSS627A is now complete. The changes will take effect the next
   time you reboot the system.

9. Log in as root on tty01, and shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, application of the SLS is complete.

Removal Instructions
--------------------
Note: Patches must be rolled back in the reverse order in which they
      were installed on a per-component basis.  SLS OSS627A, the Intel
      Pentium Pro and Pentium II Microcode Driver, consists of a patch
      to the SCO Unix component.  If this component was patched after
      SLS OSS627A was installed, then you will have to roll back the later
      patch before you can roll back the SLS OSS627A patch.
1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS627A: Pentium microcode update".

4. Pull down the "Software" menu and select "Rollback Patch".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS OSS627A is now complete.  You must reboot your system for the
   removal to take effect.

6. As root on tty01, shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, removal of the SLS is complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 111421. Reproduced with permission. The original is at www.sco.com/ta/111421, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.