Technical article 111821

What is SLS OSS630A, the OpenServer 5 UDK Socket Supplement?

OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

getsockopt incorrectly maps OpenServer 5 socket types onto UnixWare 7 socket types.

Solution

Support Level Supplement (SLS) OSS630A, the OpenServer 5 UDK Socket Supplement, corrects this problem.

See the attached cover letter for more information, including installation instructions.

NOTES:    This is referenced in Progress' problem database as "Related Progress
          Bug 19991201-015".
Dear SCO Customer,

Support Level Supplement (SLS) OSS630A, the OpenServer UDK Socket Supplement, addresses the following problem:

-  getsockopt incorrectly maps OpenServer 5 socket types onto UnixWare
   7 socket types. A binary compiled on UnixWare 7.1.1 will see a
   different integer value as a socket type returned by getsockopt
   depending on whether it is executed on UnixWare or OpenServer (with
   OSRcompat).
Contents
--------
/udk/usr/lib/Nlibsocket.so.1
Software Notes and Recommendations
----------------------------------

SLS OSS630A should only be installed on:

SCO OpenServer Release 5.0.4, 5.0.5, 5.0.6 with the OSRcompat module installed

If your system is running any libraries or commands that are contained in this SLS, then these programs will continue to run with the old versions of these libraries or commands until the the system is rebooted.

Note that when all necessary patches have been installed, it is recommended that you reboot the system at the earliest opportunity. This will ensure that no programs continue to run with the old libraries or commands.

Installation Instructions
-------------------------

1. Download the oss630a.Z file to the /tmp directory on your machine.

2. As root, uncompress the file and add the package to your system using these commands:

$ su
Password: <type your root password>
# uncompress /tmp/oss630a.Z
# pkgadd -d /tmp/oss630a
# rm /tmp/oss630a
Alternatively, this SLS package may be installed in quiet mode,
that is, without displaying the release notes and asking for
installation confirmation.  To do this, use these commands:
$ su
Password: <type your root password>
# uncompress /tmp/oss630a.Z
# pkgadd -qd /tmp/oss630a all
# rm /tmp/oss630a

3. There is no need to reboot the system after installing this package.

The release notes displayed prior to installation can be found in:

/var/sadm/pkg/oss630a/install/oss630.txt
Removal Instructions
--------------------

1. As root, remove the package using these commands:

$ su
Password: <type your root password>
# pkgrm oss630

2. There is no need to reboot the system after removing this package.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 111821. Reproduced with permission. The original is at www.sco.com/ta/111821, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.