Problem
Older versions of OpenServer BIND contain potential security vulnerabilities.
Solution
See the attached cover letter that accompanies this SLS for more information.
------------------------------------------------------------------------
Dear SCO Customer,This package contains Support Level Supplement (SLS) OSS640A, the BIND Update.
------------------------------------------------------------------------
I. Software Notes and Recommendations1. OSS640A should only be installed on:
SCO OpenServer Enterprise System Release 5.0.5, 5.0.6, 5.0.6A SCO OpenServer Host System Release 5.0.5, 5.0.6, 5.0.6A SCO OpenServer Desktop System Release 5.0.5, 5.0.6, 5.0.6A
2. This supplement supersedes the following supplements:
none3. If you have questions regarding this supplement, or the product on which it is installed, please contact your software supplier.
------------------------------------------------------------------------
II. Installation Instructions1. Download the OSS640A media image files (VOL.000.000 and VOL.001.000), and place the files in the /tmp directory.
2. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Pull down the "Software" menu and select "Install New".
4. When prompted for the host from which to install, choose the local machine and then "Continue".
5. In the "Select Media" menu, pull down the "Media Device" menu. Select
"Media Images", then choose "Continue".6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK".
7. When prompted to select software to install, make sure that the
"OSS640A: BIND Update" entry is highlighted. Choose "Install".8. Installation of SLS OSS640A is now complete. To exit the Software
Manager, select "Exit" from the "Host" menu.9. Reboot the system after installing this package.
------------------------------------------------------------------------
III. Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were
installed on a per-component basis. That is, if OSS640A - the BIND
Update - is not the most recent patch applied to the UNIX component
of the product, you will have to roll back all patches applied after
OSS640A prior to rollback of OSS640A.1. Log in as root.2. Execute the command:# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Highlight "OSS640A: BIND Update".4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager. Removal of
SLS OSS640A is now complete.6. Reboot the system after removing this package.
------------------------------------------------------------------------
IV. Problem Fixederg711600: This fix addresses security problems in previous versions of BIND, and provides the latest OpenServer version.
------------------------------------------------------------------------
V. Contents /etc/addr
/etc/dig
/etc/dnsquery
/etc/host
/etc/named
/etc/named-xfer
/etc/ndc
/etc/nsupdate
/usr/bin/nslookup
/usr/include/resolv.h
/usr/lib/libresolv.a
/usr/lib/libresolv.so.1
/usr/lib/libsocket.a
/usr/lib/libsocket.so.2
/usr/lib/libp/libresolv.a
/usr/lib/libp/libresolv.so.1
/usr/lib/libp/libsocket.a
/usr/lib/libp/libsocket.so.2
------------------------------------------------------------------------