Technical article 116303

What is SLS OSS645A, the Audit Subsystem Security Supplement?

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

Older versions of dlvr_audit are vulnerable to a potential security exploit.

Solution

Support Level Supplement (SLS) OSS645A, the Audit Subsystem Security Supplement, addresses this issue.

See the attached cover letter for more information, including installation instructions.

Dear SCO Customer,
Support Level Supplement (SLS) OSS645A, the Audit Subsystem Security Supplement,
addresses potential security exploit of dlvr_audit.  This SLS resolves the
issue and provides additional security.
Software Notes and Recommendations
----------------------------------
*******************
**Important Note**: You MUST first install "SLS OSS640A: BIND Update" before
******************* attempting to install this SLS.  SLS OSS640A installs files
                    that are necessary for OSS645A (this SLS) to function
                    properly!

SLS OSS645A is intended for use on these products:

OpenServer Release 5.0.5
OpenServer Release 5.0.6
Installation Instructions
-------------------------

1. Download the OSS645A media image file (oss645a file), place the file in the /tmp directory and rename the file by typing these commands:

mv /tmp/oss645a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install, choose the local machine and then "Continue".

5. In the "Select Media" menu, pull down the "Media Device" menu.  Select
   "Media Images", then choose "Continue".

6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK".

7. When prompted to select software to install, make sure that the "OSS645A: Audit Subsystem Security Supplement" entry is highlighted. Choose "Install".

8. Installation of SLS OSS645A is now complete.  To exit the Software Manager,
   select "Exit" from the "Host" menu.
Removal Instructions
--------------------
Note: Patches must be rolled back in the reverse order in which they were
      installed on a per-component basis.  That is, if OSS645A - the Audit
      Subsystem Security Supplement - is not the most recent patch applied
      to the UNIX component of the product, you will have to roll back all
      patches applied after OSS645A prior to rollback of OSS645A.

To remove SLS OSS645A, take these steps:

1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS645A: Audit Subsystem Security Supplement".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS OSS645A is now complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 116303. Reproduced with permission. The original is at www.sco.com/ta/116303, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.