Technical article 119268

What is SLS OSS649A, the idscsi Update for OpenServer Release 5.0.5?

OpenServer 5.0.5

Written

Solution

Support Level Supplement (SLS) OSS649A corrects idscsi behavior when driver names are greater than four characters.

See the attached cover letter that accompanies this SLS for more information, including installation instructions.

Dear SCO Customer,

Support Level Supplement (SLS) OSS649A, the idscsi Update for OpenServer 5.0.5, addresses the following problem:

On a system with an Adaptec Ultra 160 controller, while relinking the kernel after running 'mkdev tape' the following error occurs:

"conf.c", line 1614: illegal character: 001 (0ctal) "conf.c", line 1614: cannot recover from earlier errors: goodbye! ERROR: conf.c will not compile properly

/var/opt/K/SCO/link/1.1Eb/etc/conf/pack.d/ad160/space.c: 42
Illegal character in preprocessor
SLS OSS649A contains these files:
/etc/conf/bin/idscsi
Software Notes and Recommendations
----------------------------------
SLS OSS649A should only be installed on:
SCO OpenServer Release 5.0.5
Installation Instructions
-------------------------

1. Download the OSS649A media image file from:

https://ftp.scoexpert.com/openserver5/oss649a

Place the file in the /tmp directory, and rename the file by typing the command:

# mv /tmp/oss649a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install, choose the local machine and then "Continue".

5. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK".

7. When prompted to select software to install, make sure that the
   "OSS649A" entry is highlighted.  Choose "Install".
8. Installation of SLS OSS649A is now complete.  To exit the Software
   Manager, select "Exit" from the "Host" menu.
Removal Instructions
--------------------

Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.

To remove SLS OSS649A from SCO OpenServer 5.0.5, follow these steps:

1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS649A: idscsi Update for OpenServer 5.0.5(ver 1.0.0)".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS OSS649A is now complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 119268. Reproduced with permission. The original is at www.sco.com/ta/119268, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.