Technical article 119962

What is SLS OSS651B, the Intel Processor Microcode Driver for SCO OpenServer Release 5.0.6?

OpenServer 5.0.6

Written · Last revised

Problem

I understand that Intel has released fixes to the Pentium II, III, and 4 family of processors. How can I get these fixes on my SCO OpenServer Release 5.0.6 system?

Solution

Support Level Supplement (SLS) OSS651B, the Intel Processor Microcode
Driver Supplement for SCO OpenServer 5 Release 5.0.6, provides the
proper microcode fixes to the system's Pentium Pro, Pentium II,
Pentium II Xeon, Pentium III, Pentium III Xeon, Pentium 4, Xeon, and
Celeron processors.  The p6update program itself is also updated.
-----------------------------------------------------------
Dear SCO Customer,

Support Level Supplement (SLS) OSS651B, the Intel Processor Microcode Driver, provides support for the downloading of new microcode to Intel Pentium Pro, Pentium II, III, and 4 processors.

SLS OSS651B is intended for use on these products:

SCO OpenServer Release 5.0.6 with Release Supplement 506a (rs506a)

Installation Instructions
-------------------------
          1. Download the OSS651B media image file (oss651b), place the file
	     in  the /tmp directory and rename the file by typing these
	     commands:
mv /tmp/oss651b /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for which host to install from, choose the local machine and then "Continue".

5. When prompted to select the media device:

If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.

	     If you are installing this SLS from media
	     images per step 1, select "Media Images", then "Continue".
	     When prompted for the  "ImageDirectory", enter "/tmp" (or
	     the directory where you placed the  VOL file in step 1), and then
	     select "OK".

6. When prompted to select software to install, ensure that the "OSS651B" entry is highlighted. Choose "Install".

          7. Once the installation finishes, quit the Software Manager.
             Installation of SLS OSS651B is now complete. The changes will
	     take  effect next time you reboot the system.

8. Log in as root on tty01, and shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, application of the SLS is complete.

Removal Instructions
--------------------
          Note: Patches must be rolled back in the reverse order in which they
          were installed on a per-component basis. SLS OSS651B, the Intel
          Processor Microcode Driver, consists of a patch to the SCO Link kit
          component. If this component was patched after SLS OSS651B was
          installed, then you will have to roll back the later patch before
	  you  can roll back the SLS OSS651B patch.
1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS651B: Pentium family microcode supplement".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS651B is now complete. You must reboot your system for the removal to take effect.

6. As root on tty01, shut down the system:

# shutdown -g0 -y
             After shutting down and rebooting the machine, removal of the
	     SLS is  complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 119962. Reproduced with permission. The original is at www.sco.com/ta/119962, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.