Technical article 119963

What is SLS OSS652A, the Intel Processor Microcode Driver for SCO OpenServer Release 5.0.5?

OpenServer 5.0.5

Written

Problem

I understand that Intel has released fixes to the Pentium II, III, and 4 family of processors. How can I get these fixes on my SCO OpenServer Release 5.0.5 system? How can I erase my Pentium III processor serial number?

Solution

Support Level Supplement (SLS) OSS652A, the Intel Processor Microcode Driver Supplement for SCO OpenServer 5 Release 5.0.5, provides the proper microcode fixes to the system's Pentium Pro, Pentium II, Pentium II Xeon, Pentium III, Pentium III Xeon, Pentium 4, Xeon, and Celeron processors. It also adds support for erasure of the Pentium III Serial Number (PSN) and may resolve other Pentium family processor issues.

SLS OSS652A supersedes all versions of OSS471. Any version of SLS OSS471 must be removed before installing OSS652A.

-----------------------------------------------------------
Dear SCO Customer,
          Support Level Supplement (SLS) OSS652A, the Intel Processor
	  Microcode  Driver, provides support for the downloading of new
	  microcode to  Intel Pentium Pro, Pentium II, III, and 4 processors,
	  as well as  support for erasure of the Pentium Processor Serial
	  Number (PSN).  Other Pentium family processor issues may also be
	  addressed by this SLS.

SLS OSS652A is intended for use on these products:

SCO OpenServer Release 5.0.5 with Release Supplement 505a (rs505a)

SLS OSS652A supersedes all versions of OSS471. Any version of SLS OSS471 must be removed before installing OSS652A.

Installation Instructions
-------------------------
          1. Download the OSS652A media image file (oss652a), place the file
	     in  the /tmp directory and rename the file by typing these
	     commands:
mv /tmp/oss652a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for which host to install from, choose the local machine and then "Continue".

5. When prompted to select the media device:

             If you are installing this SLS from diskette media, select
             the appropriate floppy disk drive and then "Continue".
	     Proceed to step 6. If you are installing this SLS from media
	     images per step 1, select "Media Images", then "Continue".
	     When prompted for the  "ImageDirectory", enter "/tmp" (or
	     the directory where you placed the  VOL file in step 1, and
	     then select "OK".

6. When prompted to select software to install, ensure that the "OSS652A" entry is highlighted. Choose "Install".

          7. During installation of OSS652A, you may choose to have the Pentium
             III Processor Serial Number (PSN) erased. This change is not
             permanent; each time the system is powered on the PSN is
	     restored, and each time the operating system boots, it is
	     erased (if this  option is selected). Your selection can be
	     changed by removing and reinstalling SLS OSS652A.
          8. Once the installation finishes, quit the Software Manager.
             Installation of SLS OSS652A is now complete. The changes will
	     take  effect the next time you reboot the system.

9. Log in as root on tty01, and shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, application of the SLS is complete.

Removal Instructions
--------------------

Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. SLS OSS652A, the Intel Processor Microcode Driver, consists of a patch to the SCO Link kit component. If this component was patched after SLS OSS652A was installed, then you will have to roll back the later patch before you can roll back the SLS OSS652A patch.

1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS652A: Pentium family microcode supplement".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager. Removal of SLS OSS652A is now complete. You must reboot your system for the removal to take effect.

6. As root on tty01, shut down the system:

# shutdown -g0 -y

After shutting down and rebooting the machine, removal of the SLS is complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

--------------090400020303080806050501--

From the Xinuos technical article database, record 119963. Reproduced with permission. The original is at www.sco.com/ta/119963, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.