Problem
What is Support Level Supplement (SLS) OSS408A and how do I install it?
Solution
The attached cover letter describes the enhancements and corrections to known problems for SCO OpenServer Release 5.0.0 found in, and installation procedures for, SLS OSS408A.
NOTE: The contents of SLS OSS408A is now included in SCO OpenServer
Release Supplement 5.0.0d.Dear SCO Customer,The enclosed Support Level Supplement (SLS) OSS408A, the Custom Installation Supplement, allows you to use Custom to install 3rd party product upgrades that were manufactured using legacy Custom specification onto SCO OpenServer Release 5.
This SLS is to be installed on:
SCO OpenServer Enterprise Release 5.0.0 SCO OpenServer Host Release 5.0.0 SCO OpenServer Desktop Release 5.0.0
However, this SLS is included in the SCO OpenServer Release 5
Release Supplement version 5.0.0d. Hence, before installing
this SLS, use the Software Manager to check which patches are
currently applied to the system. If version 5.0.0d or later
of the SCO OpenServer Release 5 Release Supplement is already
applied, DO NOT apply this SLS. See "INSTALLATION AND REMOVAL
INSTRUCTIONS" below for explanations of "applying" vs "loading"
patches.The new Software Storage Objects (SSO) technology built into
SCO OpenServer Release 5 allows upgrades for 3rd party products
that were built using the Custom Distribution Mastering Toolkit
(CDMT). However, if a non-CDMT custom product is installed and
an upgrade is attempted, this error message will occur:(\) A different version of "....." is already installed. It must be removed before installing this version.
Installation of the upgrade is then prevented from proceeding.
NOTE: SCO does _not_ recommend removing the original product and installing a new one, as it may result in loss of configuration of the product being reinstalled.
INSTALLATION AND REMOVAL INSTRUCTIONSNOTE: As a patch, OSS408A can be "applied" and/or "loaded" in the SCO OpenServer Release 5 paradigm:
- "Applying" a patch to a machine results in the problem being corrected on that machine only.
- "Loading" a patch on a machine results in the machine acting as a server to other machines (if they are on the same network) that may need that patch 'applied'.
I. LOADING THE PATCHA. Log in as root.B. If you are installing SLS OSS408A from floppy disk media, skip this step and proceed to step C.
If you are installing SLS OSS408A from a media image, there is a
file called oss408a.Z. Uncompress this file with this command:# uncompress oss408a.ZCreate a directory under /tmp. (In this example, the directory is named "oss408a.d".) Copy the file to this directory and name it "VOL.000.000":
# cp oss408a /tmp/oss408a.d/VOL.000.000C. Execute the command:#scoadmin softwareor double click on the Software Manager icon on the desktop.
D. Pull down the "Software" menu and select:
Patch Management-->Load PatchE. You will see the "Begin Load Patch" menu. Be sure the
local machine name is selected and choose "Continue".F. You will see the "Select Media" menu.
1. If you are loading SLS OSS408A from floppy disk media,
select the appropriate floppy disk drive and choose
"Continue". Proceed to step G.2. If you are loading this SLS from a media image per step B,
pull down the "Media Device" menu and select "Media Images",
then choose "Continue". You will then see the "Enter Image
Directory" menu. Enter /tmp/oss408a.d and choose "OK".G. You will see the "Load Patch Preference" menu. Choose "Full".H. You will see the "Load Patch Progress" window. If the patch
loads successfully, you will see a "Message" window which states
"Load Patch complete". Choose "OK". You are then returned to
the main Software Manager window.J. To apply the patch now, follow directions in section II
(Applying the Patch) beginning with step B. To exit the Software
Manager now, select "Exit" from the "Host" menu.II. APPLYING THE PATCHA. Log in as root. Execute the command:
# scoadmin softwareor double click on the Software Manager icon on the desktop.
B. Pull down the Software menu and select:
Patch Management-->Apply PatchC. You will see the "Begin Apply Patch" menu.
1. If the patch is being applied from your local hard disk, the machine name should be the name of the local machine.
2. If the patch is being applied from a floppy, the machine name should be the name of the local machine.
3. If the patch is being applied from a remote patch server, the machine name should be the name of the remote machine.
Choose "Continue".D. You will see the "Select Media" menu. The "Hard Disk" menu item
should already be selected. Choose "Continue".E. You will be presented with the "Select Patch-product to Apply"
menu. Highlight "allow old custom upgrade" and then choose
"Full" to continue.F. You will see the "Apply Patch Progress" window as the system applies the patch.
G. Shortly, you will see a "Message" window stating "Apply Patch
Complete". Choose "OK" and you will be returned to the Software
Manager's main menu. Exit the Software Manager by choosing "Exit"
from the "Host" menu. Application of the patch is complete.III. NETWORK INSTALLATIONTo install the patch on other SCO OpenServer 5.0.0 machines over
the network, load the patch as in section II above on a designated
installation server. Then create the user "swadmin" on the
installation server.When running the Software Manager on the system where the patch
will be installed, you will be prompted for the source location
of the patch in the "Begin Load Patch" window. Be sure to choose
"From Another Host" during this phase. You will need to provide
the name of the installation server, as well as the password of
the "swadmin" user on the installation server, to initiate the
installation process.IV. PATCH REMOVALNOTE: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. Hence, if the "allow old custom upgrade" is not the most recent patch applied to the UNIX component of the product, you will have to rollback all patches applied after the "allow old custom upgrade" prior to rollback of the "allow old custom upgrade" patch.
A. Log in as root.B. Execute the command:# scoadmin softwareor double click on the Software Manager icon in the desktop.
C. Pull down the "Software" menu and select:
Patch Management-->Rollback PatchD. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to rollback. Select "SCO UNIX System V Operating System" and choose "Continue".
E. You will see the "Patch Selection" window. Make sure that the "allow old custom upgrade" is selected, and choose "Continue".
F. You will see the "Confirm Selected Patches" window. Choose
"Rollback" to confirm removal of the patch. You will see the
"Rollback Progress" window, as the system performs the rollback
of the patch.G. Shortly, you will see a "Message" window stating "Rollback
Patch Complete". Choose "OK" and you will be returned to the
Software Manager's main menu. Exit the Software Manager by
choosing "Exit" from the "Host" menu. Rollback of the patch
has been completed.H. To also unload the patch, making it no longer available to
be applied, follow the steps in this section. In step C, choose:"Patch Management-->Unload Patch"instead of:"Patch Management-->Rollback Patch"If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.
We appreciate your business.SCO Support Services