Technical article 105053

What is Support Level Supplement (SLS) OSS430A?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

What is Support Level Supplement (SLS) OSS430A and how do I install it?

Solution

The attached cover letter describes the enhancements and corrections to known problems for SCO OpenServer Release 5.0.0 and 5.0.2 found in, and the installation procedure for, SLS OSS430A.

Dear SCO Customer,
The enclosed Support Level Supplement (SLS) OSS430A, the Motif Menu Traversal
Supplement, corrects a fault in the Motif library where Motif was exhibiting
the incorrect behavior if the Help Widget was not positioned as the last
widget in the menubar's child widget list.  This is known to cause problems
with the Developer 2000 product from Oracle Corporation on SCO OpenServer
Release 5.0.0 and 5.0.2.
INSTALLATION AND REMOVAL INSTRUCTIONS
Installing patches on SCO OpenServer 5.0.0 or 5.0.2 usually consists of two
phases: "Loading" and "Applying".  The instructions that follow enable you
to both install the patch from distribution media or media image, as well
as configure the patch to be installed from a remote SCO OpenServer 5.0.0
system over a TCP/IP network.
I. BEFORE LOADING THE PATCH

Ensure that SCO OpenServer Release Supplement 5.0.0d has been installed before loading and applying this SLS.

II. LOADING THE PATCH
1. Log in as root.

2. If you are installing this SLS from floppy disk media, skip this step and proceed to step 3.

If you are installing this SLS from a media image, there is a file
called oss430a.Z.  Uncompress this file with this command:
# uncompress oss430a.Z

Copy the file to the /tmp directory and name it VOL.000.000:

# cp oss430a /tmp/VOL.000.000
3. Execute the command:
# scoadmin software

or double click on the Software Manager icon on the desktop.

4. Pull down the "Software" menu and select "Patch Management-->Load Patch".

5. You will see the "Begin Load Patch" menu.  Be sure the
   local machine name is selected and choose "Continue".

6. You will see the "Select Media" menu.

a. If you are loading this SLS from floppy disk media,
   select the appropriate floppy disk drive and
   choose "Continue".  Proceed to step 7.
b. If you are loading this SLS from a media image per step 2,
   pull down the "Media Device" menu and select "Media Images",
   then choose "Continue".  You will then see the "Enter Image
   Directory" menu.  Enter /tmp and choose "OK".
7. You will see the "Load Patch Preference" menu.  Choose "Full".
8. You will see the "Load Patch Progress" window.  If the patch loads
   successfully, you will see a "Message" window which states "Load
   Patch complete".  Choose "OK".  You are then returned to the main
   Software Manager window.
9. To apply the patch now, continue with step 2 under section III,
   "Applying the Patch".  To exit the Software Manager now, select
   "Exit" from the "Host" menu.
III. APPLYING THE PATCH
NOTE: Before applying this SLS, ensure that the Motif Development
      System is already installed on the system.  Use the Software
      Manager to check the list of installed software; look for:
      X11/Motif Development System component (version 5.2.5h).

1. Log in as root. Execute the command:

# scoadmin software

or double click on the Software Manager icon on the desktop.

2. Pull down the Software menu and select "Patch Management-->Apply Patch".

3. You will see the "Begin Apply Patch" menu.  Be sure that the local
   machine name is selected and choose "Continue".
4. You will see the "Select Media" menu. The "Hard Disk" menu item
   should already be selected.  Choose "Continue".

5. You will be presented with the "Select Patch-product to Apply" menu. Highlight the "Motif Menu Traversal Supplement" patch and then choose "Full" to continue.

6. You will see the "Apply Patch Progress" window as the system applies
   the patch.  When the patch has been applied you will see the "Apply
   Patch complete" window.  Select "OK".  The application of this patch
   is now complete.
IV. NOTES ON NETWORK INSTALLATION
To install the patch on other SCO OpenServer 5.0.0 machines over the network,
first load the patch as in section I above on a designated installation
server.  Then create the user "swadmin" on the installation server.
When running the Software Manager on the system where the patch will be
installed, you will be prompted for the source location of the patch in
the "Begin Load Patch" window.  Be sure to choose "from another host"
during this phase.  You will need to provide the name of the installation
server, as well as the password of the "swadmin" user on the installation
server, to initiate the installation process.
V. PATCH REMOVAL
NOTE: Patches must be rolled back in the reverse order in which they were
installed on a per-component basis.  Hence, if the "Motif Menu Traversal
Supplement" patch is not the most recent patch applied to the X11/Motif
Development System component of the product, you will have to rollback
all patches applied after the "Motif Menu Traversal Supplement" patch
prior to rollback of the "Motif Menu Traversal Supplement".

If you want to remove the patch, take these steps:

1. Log in as root.
2. Execute the command:
# scoadmin software

or double click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Patch Management-->Rollback Patch".

4. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to rollback. Select "X11/Motif Development System component" and choose "Continue".

5. You will see the "Patch Selection" window. Make sure that the "Motif Menu Traversal Supplement" patch is selected, and choose "Continue".

6. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the " Motif Menu Traversal Supplement" patch.

7. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. When the rollback is complete a message window will appear saying "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu. Rollback of the patch is now complete. Exit the Software Manager by choosing "Exit" from the "Host" menu.

8. To also unload the patch, making it no longer available to be applied,
   follow the steps in this section.  In step 3, choose:
"Patch Management-->Unload Patch"
instead of:
"Patch Management-->Rollback Patch"

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

We appreciate your business.
SCO Support Services

From the Xinuos technical article database, record 105053. Reproduced with permission. The original is at www.sco.com/ta/105053, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.