Problem
What is Support Level Supplement (SLS) OSS443A and how do I install it?
Solution
The attached cover letter describes the enhancements and corrections to known problems for SCO OpenServer Release 5.0.0 found in, and the installation procedure for, SLS OSS443A.
Dear SCO Customer,The enclosed Support Level Supplement, (SLS) OSS443A, the Sendmail Security
Supplement, installs a newer version (8.8.5) of sendmail that corrects all
known security vulnerabilities (as of CERT CA-97.05). For a detailed list
of updates to sendmail from version 8.6.8 to 8.8.5, please see
ftp://ftp.sendmail.org/pub/sendmail/RELEASE_NOTES.SLS OSS443A is intended for SCO OpenServer Operating System Releases 5.0.0, and 5.0.2, and SCO Internet FastStart Releases 1.0.0 and 1.1.0, running SCO's distribution of Sendmail 8.6.8 or Sendmail 8.7.6.
Note that for SCO OpenServer 5.0.0 and SCO OpenServer 5.0.2, the default mail system is MMDF (Multi-Channel Memorandum Distribution Facility). SCO Internet FastStart uses only sendmail. Hence, this SLS is applicable to all SCO Internet FastStart systems. However, this SLS should only be installed on SCO OpenServer 5.0.0 or SCO OpenServer 5.0.2 if you have specifically chosen sendmail as the mail system during or after the installation process.
INSTALLATION AND REMOVAL INSTRUCTIONSThe instructions that follow enable you to both install the upgrade from distribution media or media image.
I. LOADING THE SUPPLEMENT1. Log in as root.2. If you are installing this SLS from floppy disk media, skip this step and proceed to step 3.
If you are installing this SLS from a media image, there is a file
called oss443a.Z. Uncompress this file with this command:# uncompress oss443a.ZCopy the file to the /tmp directory and name it VOL.000.000:
# cp oss443a /tmp/VOL.000.0003. Execute the command:# scoadmin softwareor double click on the Software Manager icon on the desktop.
4. Pull down the "Software" menu and select "Install New".
5. You will see the "What host (machine) do you want to install
from?" menu. Be sure the local machine name is selected and
choose "Continue".6. You will see the "Select Media" menu.
a. If you are loading this SLS from floppy disk media,
select the appropriate floppy disk drive and
choose "Continue". Proceed to step 7.b. If you are loading this SLS from a media image per step 2,
pull down the "Media Device" menu and select "Media Images",
then choose "Continue". You will then see the "Enter Image
Directory" menu. Enter /tmp and choose "OK".7. You will see the "Install Preference" menu. Choose "Full".8. You will see the "Upgrading Components Warning" menu. Choose
"Continue". Note that the upgrade does not change your current
Sendmail configuration files.9. You will see the "Install Progress" window. If the supplement
loads successfully, you will see a "Message" window that states
"Installation Complete". Choose "OK". You are then returned to
the main Software Manager window. Sendmail will now restart
with the new version of Sendmail active.10. To exit the Software Manager now, select "Exit" from the "Host" menu.
II. NOTES ON NETWORK INSTALLATIONTo install the supplement on other SCO OpenServer 5.x based machines over
the network, first load the supplement as in section I above on a designated
installation server. Then create the user "swadmin" on the installation
server.When running the Software Manager on the system where the supplement will
be installed, you will be prompted for the source location of the supplement
in the "What host (machine) do you want to install from?" window. Be sure
to choose "From Another Host" during this phase. You will need to provide
the name of the installation server, as well as the password of the "swadmin"
user on the installation server, to initiate the installation process.III. SUPPLEMENT REMOVAL1. Log in as root.2. Execute the command:# scoadmin softwareor double click on the Software Manager icon in the desktop.
3. Pull down the "Software" menu and select "Remove Software".
4. You will see the "Confirm Selected Software" menu. Choose "Continue".5. You will see the "Remove Software Progress" window.
6. If the supplement has been removed successfully, you will see
"Software Removal Complete" message. Choose "OK" and you will
be returned to the Software Manager's main menu. Exit the
Software Manager by choosing "Exit" from the "Host" menu.
At this point Sendmail will be removed and there will be no
configured version of Sendmail on your system.If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.
We appreciate your business.SCO Support Services