Problem
What is Support Level Supplement (SLS) OSS465A, the Scomail Supplement for SCO OpenServer Release 5.0.0, 5.0.2, and 5.0.4, and how do I install it?
Solution
Support Level Supplement (SLS) OSS465A addresses several known problems with the Scomail mail utility that is shipped with SCO OpenServer Release 5 family of operating system products.
See the attached cover letter that accompanies this SLS for more information, including installation instructions.
Dear SCO Customer,The enclosed Support Level Supplement (SLS) OSS465A, the Scomail Supplement, corrects several known problems with Scomail in the SCO OpenServer Release 5 family of operating system products.
SLS OSS465A is intended for use on these products:
SCO OpenServer Release 5.0.0, 5.0.2, 5.0.4 SCO OpenServer Internet FastStart Release 5.0.4 SCO Internet FastStart Release 1.0.0, 1.1.0
If you are installing SLS OSS465A on a system with SCO OpenServer Release 5.0.0, the SCO OpenServer Release Supplement 5.0.0d (rs500d) and Networking Supplement 1.0.0 (net100) must be installed prior to installing SLS OSS465A.
The following list highlights the changes to ScoMail for OSS465A:
- Scomail hangScomail hangs at startup under certain conditions.
- Scomail coredumpMultipart/mixed MIME messages with a single part non-text body part are not parsed correctly; scomail will coredump when you try to save the folder.
- Scomail FD leakScomail leaks a file descriptor for each text/enriched message
or attachment when it parses a mail folder. If too many of
these kinds of messages are present and scomail runs out of
file descriptors then a core dump occurs. Typically this occurs
during startup when the INBOX has approximately 128 or more of
these kinds of messages.Depending on your system's mail configuration setup, the installation
of OSS465A may modify /usr/mmdf/mmdftailor. If it is modified and you
wish to restore the previous, unmodified version, it will be saved in
/usr/lib/custom/oss465a.sav/usr/mmdf/mmdftailor.I. INSTALLING SLS OSS465A1. Prepare the media for installation.If you are installing this SLS from diskette media, insert the first diskette and proceed to step 2.
If you downloaded the OSS465A media image file ("VOL" file), place
the VOL file in the /tmp directory, or another directory of your
choice; see step 5. For example:/tmp/VOL.000.0002. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. For SCO OpenServer 5.0.4, pull down the "Software" menu and select "Install New".
For SCO Internet FastStart 1.x, and SCO OpenServer 5.0.0 or 5.0.2, pull down the "Software" menu and select "Patch Management --> Apply Patch".
4. When prompted for the host from which to install, choose the local machine and then "Continue".
5. When prompted to select the media device:
If you are installing this SLS from diskette media, select the appropriate floppy disk drive and then "Continue". Proceed to step 6.
If you are installing this SLS from media images per step 1, select
"Media Images", then "Continue". When prompted for the "Image
Directory", enter "/tmp" (or the directory where you placed the VOL
file in step 1) and then select "OK".6. For SCO OpenServer 5.0.4, when prompted to select software to install, ensure that the "OSS465A" entry is highlighted. Choose "Install".
For Internet FastStart 1.x, OpenServer 5.0.0 or 5.0.2, when prompted to select installation type, choose "Full".
7. Once the installation finishes, quit the Software Manager. Installation of SLS OSS465A is now complete.
II. REMOVING SLS OSS465ANote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis. The OSS465A Scomail Supplement consists of a patch to the SCO MailUA component. If this component was patched after OSS465A was installed, then you will have to roll back the later patch before you can roll back the SLS OSS465A patch.
IIa. Removing SLS OSS465A from SCO OpenServer 5.0.41. Log in as root.2. Execute the command:# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. Highlight "OSS465A: Scomail Supplement for SCO OpenServer Release 5.0".
4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager. Removal of
SLS OSS465A is now complete.IIb. Removing SLS OSS465A from SCO OpenServer 5.0.0, 5.0.2 and Internet FastStart 1.0, 1.1
1. Log in as root.2. Execute the command:# scoadmin softwareor double-click on the Software Manager icon in the desktop.
3. SLS OSS465A patches the software component SCO MailUA.
To roll back this patch, pull down the "Software" menu and select "Patch Management-->Rollback Patch".
4. Take these steps:a. You will see the "Begin Rollback Patch" menu and will be asked to select patched software to roll back. Select "SCO Mail User Agents" and choose "Continue".
b. You will see the "Patch Selection" window. Make sure that OSS465A
is selected. Choose "Continue".c. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of OSS465A.
d. You will see the "Rollback Progress" window, as the system performs the rollback of the patch, and finally a "Rollback Complete" window when the rollback is finished.
7. Exit the Software Manager by choosing "Exit" from the "Host" menu. Rollback of OSS465A is now complete.
III. PRESERVING CUSTOMIZED FILESOSS465A backs up the following user-configurable file, then modifies it:
/usr/mmdf/mmdftailorIf you have customized this file, you can restore your changes from
the backed-up copy after you install the supplement. The file is
backed up to:/usr/lib/custom/oss465a.sav/usr/mmdf/mmdftailorIf you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.
We appreciate your business.SCO Support Services