Technical article 120202

What is Support Level Supplement (SLS) OSS657A, the Minimum PIT Count Supplement for OpenServer 5.0.6

OpenServer 5.0.6

Written

Problem

What is Support Level Supplement (SLS) OSS657A, the Minimum PIT Count Supplement for OpenServer 5.0.6?

Solution

Some systems running SCO OpenServer 5.0.6 on CPUs over 1 gigahertz
may experience periodic system pauses that can be resumed by
console keyboard activity.  The problem is caused by the
Programmable Interrupt Timer (PIT) being programmed to assert and
deassert itself so fast that the CPU's attempt to service the
interrupt is unsuccessful.  This leads to an endless loop of
spurious interrupts which can only be broken by a legitimate
interrupt (such as a keystroke on the console keyboard).

The problem has been observed on certain HP and Dell Xeon systems.

          SLS OSS657A is a Boot Time Loadable Driver (BTLD) which will
          reprogram  the PIT timer to a larger minimum value which will allow
	  for stable interrupt servicing.
--------------------------------------------------------------------------------
Dear SCO Customer,

Support Level Supplement (SLS) OSS657A, the Minimum PIT Count Supplement for OpenServer 5.0.6, addresses the following problem:

          Some systems running SCO OpenServer 5.0.6 on CPUs over 1 gigahertz
	  may experience periodic system pauses that can be resumed by
	  console keyboard activity.  The problem is caused by the
	  Programmable Interrupt Timer (PIT) being programmed to assert and
	  deassert itself so fast that the CPU's attempt to service the
	  interrupt is unsuccessful.  This leads to an endless loop of
	  spurious interrupts which can only be broken by a legitimate
	  interrupt (such as a keystroke on the console keyboard).

The problem has been observed on certain HP and Dell Xeon systems.

SLS OSS657A is a Boot Time Loadable Driver (BTLD) which will reprogram the PIT timer to a larger minimum value which will allow for stable interrupt servicing.

Software Notes and Recommendations
----------------------------------
SLS OSS657A can be used with:
SCO OpenServer Release 5.0.6
Installation Instructions
-------------------------

1. Download the OSS657A media image file from:

	     https://ftp.scoexpert.com/openserver5/oss657a.btld.Z

Place the file in the /tmp directory, and extract it to a formatted floppy with this command:

zcat /tmp/oss657a.btld.Z > /dev/fd0
2. To use the BTLD with an already-installed system, go to single-user
   mode.  Mount the BTLD floppy and use btldinstall(ADM) to install it:
	     # mount -r /dev/fd0 /mnt
       	     # btldinstall /mnt
	     # umount /mnt
Relink the kernel and reboot.
3. The problem has rarely been observed during operating system
   installation (initial system load, or ISL).  If you have a system
   which is difficult to install due to continual pauses during ISL,
   start ISL with the bootstring:
	     Boot
	     : defbootstr link=mpcs
If your installation requires other BTLD(s), the syntax is
          "link=driver1,driver2".  For example:
	     Boot
	     : defbootstr link=mpcs,lsil,ivga
You do not need to follow step 2 on such systems.  The ISL process
performs the btldinstall(ADM) step for you.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 120202. Reproduced with permission. The original is at www.sco.com/ta/120202, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.