Technical article 125321

What is Support Level Supplement (SLS) OSS660A, the getty Supplement for Openserver 5.0.6?

OpenServer 5.0.6

Written · Last revised

Problem

What is Support Level Supplement (SLS) OSS660A, the getty Supplement for Openserver 5.0.6?

Solution

SLS OSS660A, the getty Supplement for OpenServer 5.0.6, addresses the following problems:

Installation of rs506a provides a new version of getty that has been enhanced so that background tasks from a previous login session do not interfere with a modem's ability to hang up, accept a subsequent connection, and login a new session.

However, some third-party applications use getty in an alternate manner: they wait for incoming calls, initialize the termio parameters, and then invoke getty to initiate a login session. The rs506a version of getty interferes with this method and does not have any options to disable the new behavior. OSS660A provides a version of getty that uses the -r flag to prevent dropping DTR and resetting the termio modes on the serial tty.

See the attached cover letter for more information, including installation instructions.

----------------------------------------------------------
Dear SCO Customer,

Support Level Supplement (SLS) OSS660A, the getty Supplement for OpenServer 5.0.6, addresses the following problem:

OSS660A provides a new version of getty that has been changed in two ways.

First, it includes a new option, -r, which prevents it from dropping DTR and
resetting the termio modes at startup.  This option is not normally needed,
because getty is normally responsible for opening the line and initializing
the termio parameters.  However, some third-party applications use getty in
an alternate manner: they wait for incoming calls, initialize the termio
parameters, and then invoke getty to initiate a login session.  In this case,
to avoid dropping connections when getty is invoked, the -r option should be
used by editing both /etc/inittab and the appropriate file under
/etc/conf/init.d (for standard serial ports, /etc/conf/init.d/sio) and adding
the -r option to the getty lines that should have their behavior modified.
The second change is to make getty operate correctly when used by ct.  No
changes (beyond installing the new getty) are needed to enable this
functionality.
Software Notes and Recommendations
----------------------------------
SLS OSS660A can be installed on:

SCO OpenServer Release 5.0.6 with Release Supplement 506A (rs506a)

Installation Instructions
-------------------------

1. Download the OSS660A media image file from:

https://ftp.scoexpert.com/openserver5/oss660a

Place the file in the /tmp directory, and rename the file by typing the command:

mv /tmp/oss660a /tmp/VOL.000.000

2. Run the Software Manager with the command:

# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install, choose the local machine and then "Continue".

5. In the "Select Media" menu, pull down the "Media Device" menu.  Select
   "Media Images", then choose "Continue".

6. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL file in step 1) and choose "OK".

7. When prompted to select software to install, make sure that the "OSS660A"
   entry is highlighted.  Choose "Install".
8. Installation of SLS OSS660A is now complete.  To exit the Software Manager,
   select "Exit" from the "Host" menu.
Removal Instructions
--------------------

Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.

To remove SLS OSS660A from SCO OpenServer 5.0.6, follow these steps:

1. Log in as root.
2. Execute the command:
# scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight "OSS660A: getty Supplement".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS OSS660A is now complete.

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 125321. Reproduced with permission. The original is at www.sco.com/ta/125321, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.