Technical article 104876

What is the custom(ADM)/SSO naming convention for volumes?

OpenServer 5.0.0

Written · Last revised

Problem

The OpenServer 5.0.0 software installation paradigm provides
the ability to install from images of physical media stored on
the filesystem.  What is the naming scheme used for such
volumes?

Solution

The naming scheme is:
VOL.xxx.yyy
where:

xxx is a 3-digit, zero-indexed number indicating the physical media volume, that is the 'number' of the floppy or tape.

and:

yyy is a 3-digit, zero-indexed number indicating the archive number on the given volume, that is the 'number' of the archive on the floppy of tape.

In general floppy distributions will usually be stored as:

VOL.xxx.000

where xxx increments representing the individual floppies, and the archive number is unchanged (as floppy volumes are not usually large enough to justify multiple archives on individual volumes).

Tape volumes will usually be stored as:

VOL.000.yyy

where yyy increments representing the multiple archives on the (usually) single physical media.

See also

Further details may be found in customextract(ADM)

From the Xinuos technical article database, record 104876. Reproduced with permission. The original is at www.sco.com/ta/104876, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.