Technical article 104875

What is the difference between loading and applying a patch?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

The OpenServer 5.0.0 software installation paradigm has the concept
of loading and applying patches.  What is the difference between
these two terms?

Solution

A loaded patch is available for application and has no effect on the system software.

An applied patch has been activated on the system software.

Loading a patch is usually a precursor for applying the patch.

When a patch is loaded on a target system, the patch is copied
to the target system from installation media or from another
system.  The patch then resides on the target system, but has
no effect on the target software until it is applied.

A loaded patch is available for application on the system on which it is loaded, and can be made available for network load or application using the swadmin account.

Patches loaded on a particular system may be listed using
custom(ADM), select the "Software" menu,  "Patch Management",
"View Loaded Patches":
|-------------------- Software Manager (custom) on sconan -------------------|
|----------------------------------------------------------------------------|
||  Host     Software     View     Options                             Help ||
|----------------------------------------------------------------------------|
|          |  Install New...        Ctrl+A+I  |                              |
| All softw|  Remove Software...    Ctrl+A+D  |                              |
|          ------------------------------------                              |
|----------|  Verify Software...              |------------------------------|
||*      SC|  Verify System...                |                             ||
||       SC|----------------------------------|                             ||
||         |  Examine             ->          |                             ||
||         |----------------------------------|                             ||
||         |  Advanced Options    ->          |                             ||
||         |-------------------------------------------------|              ||
||         |  Patch Management    ->| Apply Patch...         |              ||
||         |------------------------| Rollback Patch...      |              ||
||                                  |------------------------|              ||
||                                  | Load Patch...          |              ||
||<*********************************| Unload Patch...        |------------->||
||                                  |------------------------|               |
| View All                          | View Loaded Patches... | 2   Selected 1|
-----------------------------------------------------------------------------|
| View all patches loaded on the system                                      |
|----------------------------------------------------------------------------|
When a patch is applied on a particular system the patch is
activated on that system's software.  If the patch has not been
previously loaded, the patch is not available for network load
or application.

Applied patches may be listed using custom(ADM):

To view applied patches to particular products, the software products should be selected in custom(ADM), and the "Software" menu, "Examine", "Applied Patches" should be selected:

|-------------------- Software Manager (custom) on sconan -------------------|
|----------------------------------------------------------------------------|
||  Host     Software     View     Options                              Help||
| ---------------------------------------------------------------------------|
|          |  Install New...        Ctrl+A+I  |                              |
| All softw|  Remove Software...    Ctrl+A+D  |                              |
|          |----------------------------------|                              |
||---------|  Verify Software...              |------------------------------|
||*      SC|  Verify System...                |                             ||
||*      SC|---------------------------------------------|                  ||
||         |  Examine             ->| Attributes...      |                  ||
||         |------------------------| Files...           |                  ||
||         |  Advanced Options    ->| Applied Patches... |                  ||
||         |------------------------|--------------------|                  ||
||         |  Patch Management    ->          |                             ||
||         |----------------------------------|                             ||
||                                                                          ||
||                                                                          ||
|-<****************************************************-------------------->||
|                                                                            |
| View All                                               Total 2 Selected 2  |
|----------------------------------------------------------------------------|
| Examine the patches applied to a software package                          |
|----------------------------------------------------------------------------|

From the Xinuos technical article database, record 104875. Reproduced with permission. The original is at www.sco.com/ta/104875, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.