Technical article 115843

What is the Euro Supplement for SCO OpenServer?

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

What is the Euro Supplement for SCO OpenServer?

Solution

Install the Euro Supplement for OpenServer.

The Euro Support Supplement enables a computer running SCO OpenServer to display the Euro currency symbol on the console as well as in graphical displays, and to print the symbol to all PostScript printers.

This document assumes that you are familiar with SCO OpenServer
codesets, keyboard-mapping and mapchan files, and printing.  For
more information on these topics, consult the SCO OpenServer manual
pages and guides, which are included on-line with every SCO
OpenServer distribution.

If you have questions regarding this supplement or the product on which it is installed please contact your software supplier.

This document covers the following topics:

I. Who should install the supplement? II. Installing the supplement III. Setting the language, keyboard, and codesets IV. Using the euro currency symbol V. Installing the supplement across the network VI. Removing the supplement VII. Affected files VIII. Vidi fonts IX. Keyboard-mapping and mapchan files X. Printing XI. Locales XII. Native language support XIII. Graphics and fonts

I. Who should install the supplement?

Install this supplement on any SCO OpenServer Release 5.0.5 system.

You do not need to remove any supplements before installing the Euro Support Supplement.

II. Installing the supplement
___________________________________________________________________
NOTE: If you want to use the Euro Support Supplement along with
native language support (either French or German support from SCO,
or a third-party product), install the language-support product
before installing the Euro Support Supplement.  See this cover
letter's section XII, entitled "Native language support".
____________________________________________________________________
You can install the Euro Support Supplement from distribution media
(such  as a CD-ROM or a floppy disk) or from media images on a
software server or web site.

The supplement consists of six files with names in the form of VOL.nnn.nnn.

If you download the supplement as media images, make sure you have
all six files.
____________________________________________________________________
NOTE: To install the supplement across the network, see this cover
letter's section V., entitled "Installing the supplement across
the network".
____________________________________________________________________
Step-by-step instructions to install the supplement:
1. Log in as root.
2. Start the Software Manager by double-clicking on its icon on
   the desktop, or by entering the following at the command-line
   prompt:
           scoadmin software

3. On SCO OpenServer Release 5.0.5: From the Software menu, select Install New.

4. When prompted for the host (machine), select the current host and then select Continue.

5. In the Select Media window:
a. If you are loading this release supplement from a media
   image, click on Media Device and select Media Images, then
   select Continue.  (You may need to pull down the scroll bar
   before you see the Media Images option.)
In the Enter Image Directory window, enter the absolute
pathname for the directory in which the media images reside;
("/tmp", for example)  Click on OK.

b. If you are loading this release supplement from a CD-ROM or floppy disk, select the appropriate drive and then select Continue.

6. On SCO OpenServer Release 5.0.5: In the Install Selection window, select the Euro Support Supplement. Click on Install.

There is a short delay while the installation takes place.

7. In the Installation Complete window, click on OK.  The Software
   Manager should list the supplements you have selected.  The
   patched software is now installed.

8. Exit the Software Manager by selecting Host, then Exit.

____________________________________________________________________
NOTE: Before the Euro Support Supplement takes effect, you must
set the desired language and keyboard, change the internal and
console codesets, and reboot the system.  See this cover letter's
section III, entitled "Setting the language, keyboard, and codesets".
____________________________________________________________________
NOTE: When running a System Verify (Quick) in custom, the resulting
report may contain items pertaining to permissions, ownership and
group membership of certain files in the Euro Supplement.  Be aware
that these are very minor discrepancies and they do not affect the
functionality of the Euro Supplement, and are automatically fixable
by Custom.
____________________________________________________________________
III.  Setting the language, keyboard, and codesets
As root:
1. Determine your current console codeset setting.  It is the
   second setting listed in the file /etc/default/codeset.
2. Start the International Settings Manager by selecting System
   Administration -> System -> International Settings Manager on
   the desktop, or by entering the following at the command-line
   prompt:
          scoadmin international

3. From the scroll lists on the International Settings Manager main window, select a language and a keyboard.

4. From the Settings menu, select Codeset...Internal, then select

"ISO8859-15"   Click on OK.

5. From the Settings menu, select Codeset...Console.

If your current console codeset starts with "ISO8859", accept the default of "ISO8859-15".

If you have a PS/2(r)-style keyboard (that is, your current console codeset is "IBM850"), select "IBM858".

Click on OK.

6. Exit the International Settings Manager and reboot the machine. The new system settings take effect after you reboot.

For more information, consult the SCO OpenServer Handbook, see Chapter 12, "Specifying the locale".

IV. Using the Euro currency symbol
Make sure that your locale is ISO8859-15.  If it is not, make sure
you have correctly completed the steps in this cover letter's
section III, entitled "Setting the language, keyboard, and codesets".

To display the euro on the console:

For most keyboards, enter: <Right-Alt>E (Hold down the right-hand <Alt> key and simultaneously press E).

For British keyboards, enter: <Right-Alt>3. (Hold down the right-hand <Alt> key and simultaneously press 3).

For United States keyboards, enter: <Right-Alt>4. (Hold down the right-hand <Alt> key and simultaneously press 4).

In the graphical environment, ScoTerm uses the euro symbol fonts by
default when invoked from an ISO8859-15 locale. Some X applications
may require additional arguments to get an ISO8859-15 font.  For
example, to invoke xterm using the 10x20 fixed-width ISO8859-15 X
font, enter the following:
xterm -fn 10x20-15

The default font "fixed" is unchanged from the default ISO8859-1 fixed-width font.

For more information, see the locale(C) manual page.

V. Installing the supplement across the network
You can install the supplement from one SCO OpenServer Release 5.0.5
machine onto another across a TCP/IP network. To do so, you need a
software server, which you can create as described in the Networking
Guide, Chapter 21, "Installing and managing software over the
network".  This server has a user account called swadmin.
Use the Software Manager to install or load the Euro Support
Supplement on the software server.  See this cover letter's section
II, entitled "Installing the supplement".
To install the supplement onto a local machine from the software
server, start the Software Manager and select Install New.  In the
Begin Installation window, you are prompted for the source location
of the patch.  Select From Another Host.  You will need to provide
the name of the software server, as well as the password of the
swadmin user on the software server.
VI. Removing the supplement

Before removing the Euro Support Supplement, reset your internal and console codesets.

As root:
1. Start the International Settings Manager by selecting System
   Administration -> System -> International Settings Manager on
   the desktop, or by entering the following at the command-line
   prompt:
           scoadmin international
2. From the Settings menu, select Codeset...Internal, then select
   the codeset you used before installing the Euro Support Supplement
   (probably "ISO8859-1" or "ISO8859-2").  Click on OK.

3. From the Settings menu, select Codeset...Console, then select the codeset you used before installing the Euro Support Supplement. Click on OK.

4. Exit the International Settings Manager, and remove the Euro
   Support Supplement as described below either for SCO OpenServer
   release 5.0.5.
____________________________________________________________________
NOTE: You must remove software patches (such as release supplements)
      in the reverse order of their installation.  The Euro Support
      Supplement patches these components: SCO Unix System V Operating
      System, X Server, and Standard X Clients.  If any of these
      components were patched after the Euro Support Supplement was
      installed, you must remove all later patches before removing the
      Euro Support Supplement.
____________________________________________________________________

To remove a supplement from SCO OpenServer release 5.0.5:

1. Log in as root.

2. Start the Software Manager by double-clicking its icon on the desktop, or by entering the following at the command-line prompt:

scoadmin software

3. Select the title of the supplement you are removing.

4. From the Software menu, select Remove Software.  In the
   Confirmation window, verify that you selected the right
   supplement, then click on Remove.
____________________________________________________________________
CAUTION!  Removing a supplement (patch) on SCO OpenServer 5.0.5
release corresponds to rolling it back and unloading  it in
earlier SCO OpenServer releases.  If you need to keep a copy of
a patch loaded, click on More Options in the Confirm Selected
Software window.  Then, specify Leave Loaded, and click on Remove.
____________________________________________________________________
There is a short delay, then the Removal complete window appears.
Click on OK.  The Software Manager should no longer list the
supplement you removed.
____________________________________________________________________
NOTE:  Some effects of certain supplements are irreversible
because of the nature of the correction (for example, restoring
correct permissions on system directories).  However, removing
the supplement will remove the patch name from the system.
____________________________________________________________________

5. When you have finished removing and installing software, exit the Software Manager by selecting Host, then Exit.

   After you see the Removal Complete window, the Software Manager
   should no longer list the supplement you removed.
____________________________________________________________________
NOTE: Some effects of certain supplements are irreversible
because of the nature of the correction (for example, restoring
correct permissions on system directories).  However, removing
the supplement will remove the patch name from the system.
____________________________________________________________________

7. When you have finished removing and installing software, exit the Software Manager by selecting Host, then Exit.

VII. Affected files

The Euro Support Supplement changes the following files:

FILE NAME:
/etc/default/codeset
CHANGE:
adds support for ISO8859-15
FILE NAME:
/usr/lib/X11/xsconfig/keysymdef.h
CHANGE:
adds support for XK_euro
FILE NAME:
/usr/spool/bin/lp/bin/text2post
CHANGE:
adds support for the iso8859-15 encoding vector
FILE NAME:
/usr/lib/X11/sco/ScoTerm/LangIndex
CHANGE:
adds support for ISO8859-15

For more information, see these manual pages:

xsconfig(X) manual page
text2post(ADM) manual page
scoterm(XC) manual page
VIII. Vidi fonts
The Euro Support Supplement creates an ISO8859-15 console font
for every ISO8859-1 console font that SCO OpenServer currently
supports.  It also creates three IBM858 vidi fonts.  Access these
fonts by setting the console codeset in the International Settings
Manager.

For more information, see the vidi(C) manual page.

IX. Keyboard-mapping and mapchan files
The Euro Support Supplement creates one ISO8859-15 keyboard-mapping
file for each ISO8859-1 keyboard mapping file that SCO OpenServer
currently provides.  Each ISO8859-15 keyboard file contains the
keyboard combination for the euro that is appropriate for its locale.
These mapping files reside in /usr/lib/keyboard/*iso15*.

The Euro Support Supplement also creates one ISO8859-15 channel-mapping file and one IBM858 channel-mapping file to map between internal and console codesets.

These mapping files reside in:
/usr/lib/mapchan/ISO8859-15.

For more information, see these manual pages:

keyboard(HW) manual page
mapchan(F) manual page
X. Printing
The Euro Support Supplement:

1. Adds a PostScript printing vector (/usr/spool/lp/bin/ISO8859-15.ps) for printing text files. This file includes a euro bitmap which is sent to the printer, providing support for all PostScript printers.

2. Provides a PostScript font (/usr/spool/lp/bin/psfonts) for printing text files.

3. Modifies the text2post(ADM) utility to use the ISO8859-15.ps
   vector if the system locale is set to that codeset.  The
   supplement exports text2post to /usr/bin.

To print text files that contain the Euro symbol:

For DECColormatePS, DEClasar1150, DEClasar2250, or DEClasar3250 printers, enter the lp(C) command:

lp filename
For PostScript printing, enter:
lp -o postscript filename
For network PostScript printing, enter:
lp -o network.ps filename

For any PostScript printer, you can enter:

cat filename | text2post | lp
For more information, see:
lp(C) manual page
text2post(ADM) manual page

Chapter 4, "Managing printers and print jobs" in the System Administration Guide

XI. Locales

The Euro Support Supplement adds one ISO8859-15 locale to /usr/lib/lang for each ISO8859-1 locale currently provided by SCO OpenServer.

For more information, see:
locale(C) manual page

Chapter 12, "Specifying the locale" in the SCO OpenServer Handbook

XII. Native language support

The Euro Support Supplement enables the main SCO OpenServer Desktop to support non-English languages in ISO8859-15 locales.

To provide native language support, the Euro Support Supplement
references existing ISO8859-1 native language files, by making either
copies or symbolic links.  Therefore, if you want to use the Euro
Support Supplement along with native language support (either French
or German support from SCO, or a third-party product), install the
language-support product before installing the Euro Support
Supplement.
XIII. Graphics and fonts
The Euro Support Supplement:

1. Creates a set of fixed-width X fonts in the following file: /usr/lib/X11/fonts/misc/*-15.pcf

2. Updates the ScoTerm configuration files to support ISO8859-15 keystrokes and X fonts.

3. Adds an XK_Euro keysym to keysymdef.h.

4. Provides X locales (which are just references to ISO8859-1).

For more information, see these manual pages:

xsconfig(X) manual page
scoterm(XC) manual page
NOTES:    OpenServer 5.0.6 already includes Euro support so there is no need
          to install this supplement.

The Euro Supplement for SCO OpenServer may be downloaded from:

https://ftp.scoexpert.com/openserver5/euro/

See also

TA115842, "Which past and present SCO operating system products support entry, display and printing of the Euro symbol?"

From the Xinuos technical article database, record 115843. Reproduced with permission. The original is at www.sco.com/ta/115843, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.