Problem
What does the SCOhelp for Localization Support Supplement for SCO OpenServer 5.0.2 contain?
Solution
The attached cover letter describes SCOhelp related enhancements and corrections to known problems in SCO OpenServer Release 5.0.2, as well as the installation procedure for the SCOhelp for Localization Support Supplement for SCO OpenServer 5.0.2.
Dear SCO Customer,The enclosed SCOhelp for Localization Support Supplement for SCO OpenServer Release 5.0.2 contains these updates:
(1) A patch to SCOhelp to send the uncompressed size of the help file.
The scohelp pages are stored compressed. When the pages are delivered
to the browser, the files are uncompressed, but the size reported to
the browser is of the compressed file. Hence, the browser only reads a
subset of the entire HTML page.(2) A patch to SCOhelp to correctly use the cgi-bin/man script. The cgi-bin program "man" does not work with Netscape Navigator. This patch corrects a problem with the httpd accept types.
Note: This supplement (patch id: rs.3.11.a) is intended only for SCO systems based on SCO OpenServer 5.0.2. Systems based on SCO OpenServer 5.0.0 should use the rs.2.5.c version of this patch.
INSTALLATION AND REMOVAL INSTRUCTIONSInstalling patches on SCO OpenServer 5.0.2 usually consists of two phases:
"Loading" and "Applying". The instructions that follow enable you to
both install the patch from distribution media or media image, as well
as configure the patch to be installed from a remote SCO OpenServer 5.0.2
system over a TCP/IP network.I. LOADING THE PATCH1. Log in as root.2. If you are installing this supplement from the SCO Internet Family CD media, skip this step and proceed to step 3.
If you are installing this supplement from a media image, there is a file called VOL.000.000. Copy the file to the /tmp directory.
# cp path_where_the_file_exists/VOL.000.000 /tmp3. Execute the command:# scoadmin softwareor double click on the Software Manager icon on the desktop.
4. Pull down the "Software" menu and select "Patch Management-->Load Patch".
5. You will see the "Begin Load Patch" menu. Be sure the
local machine name is selected and choose "Continue".6. You will see the "Select Media" menu.
a. If you are loading this supplement from SCO Internet Family CD disk media, select the appropriate CD disk drive and choose "Continue".
You will then see the "Select Patch-Product To Load on ... " menu. Select the patch called:
SCOhelp Supplement for Localization Support (version rs.2.5.c)Proceed to step 7.b. If you are loading the patch from a media image per step 2,
pull down the "Media Device" menu and select "Media Images",
then choose "Continue". You will then see the "Enter Image
Directory" menu. Enter /tmp and choose "OK". You will see
the "Load Patch Preference" menu.Proceed to step 7.7. Choose "Full" to load the patch.
8. You will see the "Load Patch Progress" window. If the patch loads
successfully, you will see a "Message" window which states "Load
Patch complete". Choose "OK". You are then returned to the main
Software Manager window.9. To apply the patch now, continue with step 2 under section II,
"Applying the Patch". To exit the Software Manager now, select
"Exit" from the "Host" menu.II. APPLYING THE PATCH1. Log in as root. Execute the command:
# scoadmin softwareor double click on the Software Manager icon on the desktop.
2. If you are installing this supplement from CD disk media, skip this step and proceed to step 3.
If you are installing this supplement from a media image, there is a file called VOL.000.000. Copy the file to the /tmp directory.
# cp path_where_the_file_exists/VOL.000.000 /tmp3. You will see the "Begin Apply Patch" menu. Be sure that the local
machine name is selected and choose "Continue".4. You will see the "Select Media" menu. The "Hard Disk" menu item
should already be selected. Choose "Continue".5. You will be presented with the "Select Patch-product to Apply" menu.
Highlight the "SCOhelp Supplement for Localization Support (version rs.2.5.c)" patch and then choose "Full" to continue.
6. You will see the "Apply Patch Progress" window as the system applies
the patch. If the patch applies successfully you will see a "Message"
window which states "Apply Patch complete." Choose "OK". You are then
returned to the main Software Manager window.7. Exit the Software Manager by choosing "Exit" from the "Host" menu.
8. Log in as root on tty01, and shut down the system:
# shutdown -g0 -yAfter shutting down and rebooting the machine, application of the patch is complete.
III. NOTES ON NETWORK INSTALLATIONTo install the patch on other SCO OpenServer 5.0.2 machines over the
network, first load the patch as in section I above on a designated
installation server. Then create the user "swadmin" on the installation
server.When running the Software Manager on the system where the patch will be
installed, you will be prompted for the source location of the patch in
the "Begin Load Patch" window. Be sure to choose "From Another Host"
during this phase. You will need to provide the name of the installation
server, as well as the password of the "swadmin" user on the installation
server, to initiate the installation process.IV. PATCH REMOVALNOTE: Patches must be rolled back in the reverse order in which they were installed, on a per-component basis.
1. Log in as root.2. Execute the command:# scoadmin softwareor double click on the Software Manager icon in the desktop.
3. Pull down the "Software" menu and select "Patch Management-->Rollback Patch".
"Patch Management-->Rollback Patch".4. You will see the "Begin Rollback Patch" menu, and be asked to select patched software to rollback. Select "SCO UNIX System V Operating System" and choose "Continue".
5. You will see the "Patch Selection" window. Make sure that the "SCOhelp Supplement: Unix Component" patch is selected, and choose "Continue".
6. You will see the "Confirm Selected Patches" window. Choose "Rollback" to confirm removal of the "SCOhelp Supplement: Unix Component" patch.
7. You will see the "Rollback Progress" window, as the system performs the rollback of the patch. If the patch rollback is successful you will see a "Message" window stating "Rollback Patch Complete". Choose "OK" and you will be returned to the Software Manager's main menu.
8. Exit the Software Manager by choosing "Exit" from the "Host" menu.
9. Log in as root on tty01 and shut down the system:
# shutdown -g0 -yAfter shutting down and rebooting the machine, rollback of the patch is complete.
10. To also unload the patch, making it no longer available to be applied,
follow steps 1 through 9 in this section. However, in step 3, choose:"Patch Management-->Unload Patch"instead of:"Patch Management-->Rollback Patch"If you have questions regarding this supplement, or the product on which it is installed, please contact your software supplier.
We appreciate your business.SCO Support Services